<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.


i can get more pictures of anything that you would like to see, just PM me on honda-tech, and i'll head out to the garage and snap what you are interested in. STREETWERKZ = screenname

from my memory, i will include all these parts for the price of $1,100 might actually have more parts to include.

custom 3" cold air intake (for use of a supercharger)
B16 throttle body
ported S-tube portmatched to the B16 throttle body
jackson supercharger
EG fuel rail, DSM 450 injectors, B&M fuel pressure regulator
limited edition "fobtions" chipped and socketed PM6 ecu 2 programs.... one is a custom program for my setup with a 8,500 rpm redline, the other is the stock maps, with just a higher rev limit (8,000)
Apex-i SAFC II and obd - 0 plug in boomslang harness no wiring needed.... plug n play
various pulleys 6 psi to 11/12 psi
upgraded idler pulleys, machined billet with lips
hondata intake manifold gasket
UGR adjustable cam gear (new in box)
custom 4-1 supercharger header. its the same design as the kamikaze supercharger header, but its stainless steel.... looks pretty. short primaries into one large collector to large downpipe.




by the way, if you are DPFI....

this comes with an ECU, fuel rail, injectors, etc. the supercharger itself acts as the manifold.
i also have a resistor box, i can throw in too. this is the most complete JRSC selling on honda-tech today.


i had a case of NGK 7 spark plugs, if i can find them.... i'll throw them in too.





old hondata gasket.... with new hondata gasket in package.
http://i123.photobucket.com/al...68505

supercharger setup installed on my car. also.. custom intake and header are included. (perfect design for supercharged applications)
http://i123.photobucket.com/al...68558

side view... B&M fuel pressure regulator, EG fuel rail, DSM 450 injectors
http://i123.photobucket.com/al...68616

installed on my car with 2 other blower units..... kinda a weird picture, but i was stoked to have 3 blowers in my garage at the same time.
http://i123.photobucket.com/al...68690

m45 single cam supercharger next to my new m62 dual cam unit.
http://i123.photobucket.com/al...68752

adjustable cam gear still new in box (i can take actual photo, if you like)
http://www.undergroundracingus...r.jpg

single cam blower is in the front.
http://i123.photobucket.com/al...68797

various pulleys.... some will be includes.. anywhere from 6 psi to 11/12 psi depending on combinations.
http://i123.photobucket.com/al...68841

b&m with 90 degree bend and EG fuel rail fit perfectly on a JRSC
http://i123.photobucket.com/al...3.jpg

injector resistor box, for DSM 450s
http://i123.photobucket.com/al...2.jpg

DSM 450 injectors
http://i123.photobucket.com/al...1.jpg

SAFC II with stand
http://i123.photobucket.com/al...0.jpg

SAFC II again
http://i123.photobucket.com/al...9.jpg

plug N play boomslang OBD-0 harness for SAFC II
http://i123.photobucket.com/al...8.jpg

original SAFC II harness for anyone that is OBD-1 or OBD-2
http://i123.photobucket.com/al...6.jpg

boomslang harness
http://i123.photobucket.com/al...5.jpg

B16 throttle body next to a D16 throttle body (both OBD-0)
http://i123.photobucket.com/al...3.jpg

B16 and D16 throttle bodies
http://i123.photobucket.com/al...2.jpg

B16 throttle body mated to the ported S-tube.... (i guess i could have trimmed down the gasket a little. )
http://i123.photobucket.com/al...1.jpg

B16 throttle body on a D series motor
http://i123.photobucket.com/al...0.jpg

awesome ground clearance
http://i123.photobucket.com/al...9.jpg

header collector.... needs to be cleaned.
http://i123.photobucket.com/al...8.jpg

top view of the header
http://i123.photobucket.com/al...7.jpg

NEW cam gear
http://i123.photobucket.com/al...6.jpg

new UGR adjustable cam gear, never installed.
http://i123.photobucket.com/al...5.jpg

$1100 plus shipping

i have a ton of pictures and TWO videos of this thing in action

http://www.streetwerkzclothing...x.wmv

http://s77.photobucket.com/alb...0.flv

<U><FONT SIZE="5">SOLD!!!!</FONT></U> complete D16a6 swap too. PEACE, and thanks for looking.




Modified by STREETWERKZ at 10:06 PM 12/1/2006

 

this is gonna sell quickly....

as soon as people found out i was swapping in a supercharged B series, they were asking about it.

get it now.

 

if you PM me and dont bump my thread, i will not respond.

if you lowball, i will not respond.

i dont have to sell this, matter of fact, if i find a beater car, i will be throwing this setup into that.


will also sell complete swap for $1600 with trans and 10 lb. flywheel.

 

will not part out, unless its something that isnt 100% required for the JRSC install.

 

 

wish had some $$

 

wish you did too.

 

 

always wanted to go supercharged

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">
i have a ton of pictures and TWO videos of this thing in action</TD></TR></TABLE>

where are the vids? is this a complete bolt on to a d16a6?

 

an estimate of how much power you were making? kinda interested..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">if you PM me and dont bump my thread, i will not respond.

if you lowball, i will not respond.

i dont have to sell this, matter of fact, if i find a beater car, i will be throwing this setup into that.


will also sell complete swap for $1600 with trans and 10 lb. flywheel.</TD></TR></TABLE>

LOL, kinda harsh - but TTT

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .Jos3ph &raquo;</TD></TR><TR><TD CLASS="quote">

LOL, kinda harsh - but TTT </TD></TR></TABLE>


**** gets annoying, nah mean? im serious about selling, people should be serious about buying.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by STREETWERKZ &raquo;</TD></TR><TR><TD CLASS="quote">**** gets annoying, nah mean? im serious about selling, people should be serious about buying. </TD></TR></TABLE>

VERY VERY True, I bet you get like 500 PM's but no one serious

 

NOICE!

 

Bump for a great deal

 

anyone want to buy my nardi wheel for $300? lol. ill get the money some how, only if this lasts till friday i might be able to do it

 

i might knock the price down if its a wheel im interested in.

 

hopefully its this one
http://www.hondamarketplace.co...60352
let me know

 

bump for a good guy and seller

Buy the boost

 

nice wheel.... (although i was hoping it was the wood wheel)


quick release included?

 

wood, psh! for if i were to sell it i would sell both for $300. so if you were to knock off that much or so, or as you see fit. we could work something out, lmk

 

i got a momo.


i wanted a wood nardi though.

if you got a thread, i'll bump it so you can sell it easier.

 

 

sweet

 

check e-mail and ims... I'll take it