MY SWAP For Sale!!
Thread Starter
Honda-Tech Member
Joined: May 2005
Posts: 234
Likes: 0
From: NEW YORK
MY SWAP For Sale!!
<FONT COLOR="red">
buyer will be provided with copies of receipts for every single part in the motor (except receipt for pistons, i bought them in the snow in december and it blew away while walking out the door 2 the car
). i will also provide all empty boxes from all parts in the motor if u want (i save everything!!) the motor was built by rabbit in january of this year and has less than 10k miles. it was raced this season at the track, best time was 12.6 and makes 213whp/140tq...the motor does NOT smoke, leak or anything of the sort!!!!! oil and spark plugs changed every 2 weeks!! will also include fresh set of ngk 4554 plugs in there for u.</FONT>
<U>HEAD:</u><U>$1500</U>
<FONT COLOR="red">2000 Type R Head
Skunk2 Springs and Retainers
Supertech Flat Valves
Skunk2 Stage 3 Cams
Skunk2 Intake Manifold w. Hondata Gasket
Type R Throttle Body
Stock 240cc Injectors
AEM Silver Fuel Rail
B&M FPR, and Gauge
</FONT>
<U>BLOCK:</U> <U>$1500</U>
<FONT COLOR="red">1998 GSR Block
Wiseco 12.5 Pistons (81.5mm)
Eagle Rods
ACL Bearings
Block was bored and honed by Magnum Machine Shop in queens, receipts will be provided.
ACT 6puck Clutch, Unsprung
ACT Prolite Flywheel
ARP Headstuds
</FONT>
<U>ALSO FOR SALE:</U> M&H 22x8x13 SLICKS!!: <U>$250</U>
<FONT COLOR="red">only used a few times, plenty of use left!! SLICKS ONLY, NO WHEELS!! </FONT>
as a whole (block and head 2gether with everything listed above), <U>$2800</U> ...with the M&H Slicks, <U>$3000</U>
<FONT COLOR="red"> any questions feel free 2 contact me!!
wanna see how it was built? wanna see the parts used? proof is here: https://honda-tech.com/zerothread?id=1666555 step by step pics of how the motor was put 2gether!!
LOCATED IN NY!! WILL SHIP @ BUYERS EXPENSE!!</FONT>
buyer will be provided with copies of receipts for every single part in the motor (except receipt for pistons, i bought them in the snow in december and it blew away while walking out the door 2 the car
). i will also provide all empty boxes from all parts in the motor if u want (i save everything!!) the motor was built by rabbit in january of this year and has less than 10k miles. it was raced this season at the track, best time was 12.6 and makes 213whp/140tq...the motor does NOT smoke, leak or anything of the sort!!!!! oil and spark plugs changed every 2 weeks!! will also include fresh set of ngk 4554 plugs in there for u.</FONT><U>HEAD:</u><U>$1500</U>
<FONT COLOR="red">2000 Type R Head
Skunk2 Springs and Retainers
Supertech Flat Valves
Skunk2 Stage 3 Cams
Skunk2 Intake Manifold w. Hondata Gasket
Type R Throttle Body
Stock 240cc Injectors
AEM Silver Fuel Rail
B&M FPR, and Gauge
</FONT>
<U>BLOCK:</U> <U>$1500</U>
<FONT COLOR="red">1998 GSR Block
Wiseco 12.5 Pistons (81.5mm)
Eagle Rods
ACL Bearings
Block was bored and honed by Magnum Machine Shop in queens, receipts will be provided.
ACT 6puck Clutch, Unsprung
ACT Prolite Flywheel
ARP Headstuds
</FONT>
<U>ALSO FOR SALE:</U> M&H 22x8x13 SLICKS!!: <U>$250</U>
<FONT COLOR="red">only used a few times, plenty of use left!! SLICKS ONLY, NO WHEELS!! </FONT>
as a whole (block and head 2gether with everything listed above), <U>$2800</U> ...with the M&H Slicks, <U>$3000</U>
<FONT COLOR="red"> any questions feel free 2 contact me!!
wanna see how it was built? wanna see the parts used? proof is here: https://honda-tech.com/zerothread?id=1666555 step by step pics of how the motor was put 2gether!!
LOCATED IN NY!! WILL SHIP @ BUYERS EXPENSE!!</FONT>
Thread
Thread Starter
Forum
Replies
Last Post
StreetracerVL
Want to Buy
24
Sep 5, 2006 05:29 PM
StreetracerVL
For Sale
22
Mar 17, 2006 08:38 AM