For those of you plumbing an lsvtec or adding an auxillary oil line to a B series, an adapter of some sort will be required to attach an oil line from the head's 3/8" BSPT female threads to a standard NPT fitting. These apparently can not be found so I had to make one myself and have a few left. This is a 3/8" BSPT male thread - the correct thread to screw in the head. The female can be made to 1/8" NPT or 1/4" NPT. By use of a bushing, excessive length can be avoided, which often causes the adapter or line to work hardens and fail. These are stainless. $20 shipped.








Modified by greasemonkee at 11:11 PM 8/28/2008

 

Bump for adapters

 

up

 

Have some more of these in. If there's anything better on the market, please let me know.