I recently bent my valves and are upgrading my valvetrain. I already purchased dual valve springs and retainers and was woundering whats the cheapest set of valves i can buy? Thanks in advance.

Chris

 

U went to all the trouble of upgrading ur valvetrain and then u gonna stick the cheapest valves u can find? Valves are essential to ur valvetrain. Use REV valves...not to expensive and not the cheapest on the market.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by red01teg &raquo;</TD></TR><TR><TD CLASS="quote">U went to all the trouble of upgrading ur valvetrain and then u gonna stick the cheapest valves u can find? Valves are essential to ur valvetrain. Use REV valves...not to expensive and not the cheapest on the market. </TD></TR></TABLE>

 

cant go wrong with oem valves

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Heylookits shawn &raquo;</TD></TR><TR><TD CLASS="quote">cant go wrong with oem valves

</TD></TR></TABLE>

couldnt agree more

 

supertech oem sized valves!

 

Omni power are 190 for the set. Good price?

 

SuperTech, Rev etc are a good low cost valve, I run Ferrea but I also see 10k.

 

Either Supertech or run OE Exhaust Valves with ITR intake valves.

 

^^ ITR FTW!

 

get a set of supertech valves(SS) and get a fresh valve job.









kinda like this.



BTW i was refered to supertech valve by DonF so i knew they were good.

 

buddy club or skunk2

 

Looks like i have a lot of choices.

 

Si Valves and Supertech are what we use.

 

if you are going for any performance go Supertech or Ferrea. If you just want the car to run definately go OEM.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JoePSI &raquo;</TD></TR><TR><TD CLASS="quote">if you are going for any performance go Supertech or Ferrea. If you just want the car to run definately go OEM.</TD></TR></TABLE>

why supertechs are better and cheaper than oem.

 

A guy around me is reving to 10k in his B16 turning mid-10's on REV, so they get my vote too.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by exospeedAMcrx &raquo;</TD></TR><TR><TD CLASS="quote">Si Valves and Supertech are what we use.</TD></TR></TABLE>

I went with Si valves (Si is a performance Co., not the Civic, lol) for my B18A build, I have been worried for awhile because I haven't heard much about them. I feel much better now that you have had good experiences with them.

 

Si valves are a great company, i used them in my old civic, d16z and my last b18c1.

 

if you have an ls, i can sell you my supertechs lmk :D

 

sam92teg. the Si Valves are similar to Rev Valves.

 

Thanks Exospeed, I wished mine were flat faced tho.

 

I have some B-Series supertech valves for sale. Used and in great shape.

Shoot me an offer.....low ball me if you want I'll prolly take it

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG &raquo;</TD></TR><TR><TD CLASS="quote">why supertechs are better and cheaper than oem.</TD></TR></TABLE>

OEM is always best if you are staying stock, just my opinion.