Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (56k-no)
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (56k-no)
As the title states, got tired of the D16z6 so...
The stock motor ran great, but not the most fun in the world. It's for sale by the way, complete swap minus the P28. Make offers if interested.
I had the swap from my friends EM1 so I'll just put it in.
The bay was very dirty with that damn single cam in there.
Negro Modelo and tune ups go well together.
Local guy that I buy 7.3 International clutches from sourced me a 6 puck sprung and 12lb flywheel for $400
Nasty bay.
A little better.
B16a2 in place
Done with a little theft deterrant
Alarm system
That's it guys. Overall the car runs great, I also did the following things:
-Brake booster, brand new prop valve, 1" Integra master cylinder, Russell stainless line kit, rear disk swap, brand new front rotor, new front loaded calipers, cobalt rear pads, Blox rear LCA's, Blox Intake, Kenjii ECU, blah blah............
Comments welcomed
The stock motor ran great, but not the most fun in the world. It's for sale by the way, complete swap minus the P28. Make offers if interested.
I had the swap from my friends EM1 so I'll just put it in.
The bay was very dirty with that damn single cam in there.
Negro Modelo and tune ups go well together.
Local guy that I buy 7.3 International clutches from sourced me a 6 puck sprung and 12lb flywheel for $400
Nasty bay.
A little better.
B16a2 in place
Done with a little theft deterrant
Alarm system
That's it guys. Overall the car runs great, I also did the following things:
-Brake booster, brand new prop valve, 1" Integra master cylinder, Russell stainless line kit, rear disk swap, brand new front rotor, new front loaded calipers, cobalt rear pads, Blox rear LCA's, Blox Intake, Kenjii ECU, blah blah............
Comments welcomed
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (eg8kid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eg8kid »</TD></TR><TR><TD CLASS="quote"> 
</TD></TR></TABLE>
Thanks.
</TD></TR></TABLE>Thanks.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (Blanket Jackson)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blanket Jackson »</TD></TR><TR><TD CLASS="quote">Nice looking simple swap.
Beautiful doggie too!!!</TD></TR></TABLE>
Thanks on both comments.
Beautiful doggie too!!!</TD></TR></TABLE>
Thanks on both comments.
Trending Topics
Honda-Tech Member
iTrader: (2)
Joined: Dec 2003
Posts: 3,753
Likes: 0
From: ENGLISH MUTHA FVCKA..., DO YOU SPEAK IT
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (B_Something)
a little TLC goes a very long way...looks good
btw: beautiful pitt
btw: beautiful pitt
Junior Member
Joined: Apr 2004
Posts: 799
Likes: 0
From: San Jose, CA
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (DEESEE_JERMZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DEESEE_JERMZ »</TD></TR><TR><TD CLASS="quote">bad *** alarm </TD></TR></TABLE>
Sure is
</TD></TR></TABLE>Sure is
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (b.somethin)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b.somethin »</TD></TR><TR><TD CLASS="quote">AH HA WE MEET AGAIN LONG LOST BROTHER!</TD></TR></TABLE>
That's right, what's up man?
That's right, what's up man?
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (Taco Sauce)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Taco Sauce »</TD></TR><TR><TD CLASS="quote">That's a beautiful pit....
-thomas</TD></TR></TABLE>
Thank you sir, he's a great dog.
-thomas</TD></TR></TABLE>
Thank you sir, he's a great dog.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (Jules Winnfield)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jules Winnfield »</TD></TR><TR><TD CLASS="quote">a little TLC goes a very long way...looks good
btw: beautiful pitt </TD></TR></TABLE>
Thanks man. This is the swap I was parting out when I sold you those mounts, etc. Did you finish what you were working on?
btw: beautiful pitt
</TD></TR></TABLE>Thanks man. This is the swap I was parting out when I sold you those mounts, etc. Did you finish what you were working on?
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (B.CRUZ)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B.CRUZ »</TD></TR><TR><TD CLASS="quote">how did you clean the bay? what did you use?</TD></TR></TABLE>
I used stuff called purple power, knockoff of Castrol Super Clean, sprayed it in the bay along with Engine Brite, let it sit for about 5 min., rinse it off and repeat.
Not perfect but it is alot better.
I used stuff called purple power, knockoff of Castrol Super Clean, sprayed it in the bay along with Engine Brite, let it sit for about 5 min., rinse it off and repeat.
Not perfect but it is alot better.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (cd5_2NR)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cd5_2NR »</TD></TR><TR><TD CLASS="quote">nice setup...</TD></TR></TABLE>
Thanks.
Thanks.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (Sa.L.aS)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sa.L.aS »</TD></TR><TR><TD CLASS="quote">looks clean </TD></TR></TABLE>
Thanks man, it has been a slight dericing process.
</TD></TR></TABLE>Thanks man, it has been a slight dericing process.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (squashman702)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by squashman702 »</TD></TR><TR><TD CLASS="quote">What's the dog run in the quarter? 
</TD></TR></TABLE>
Low 11's.
</TD></TR></TABLE>Low 11's.
Honda-Tech Member
iTrader: (2)
Joined: Dec 2003
Posts: 3,753
Likes: 0
From: ENGLISH MUTHA FVCKA..., DO YOU SPEAK IT
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (B_Something)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B_Something »</TD></TR><TR><TD CLASS="quote">
Thanks man. This is the swap I was parting out when I sold you those mounts, etc. Did you finish what you were working on?</TD></TR></TABLE>
yea, i finished my B swap, then about a month later, up'd the stakes and went with a K swap....and that got stolen about 3 1/2 months after i got it done. but the car was recovered and i got some of the stuff back and now is in the rebuild process yet again. this time tho, i started off with a similar, but black, solid 61lb Alarm System just like you, and a .45
Thanks man. This is the swap I was parting out when I sold you those mounts, etc. Did you finish what you were working on?</TD></TR></TABLE>
yea, i finished my B swap, then about a month later, up'd the stakes and went with a K swap....and that got stolen about 3 1/2 months after i got it done. but the car was recovered and i got some of the stuff back and now is in the rebuild process yet again. this time tho, i started off with a similar, but black, solid 61lb Alarm System just like you, and a .45
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: Small EJ1 Build Part 1: Take the D16z6 out, clean bay(kinda), insert B16a2. (Jules Winnfield)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jules Winnfield »</TD></TR><TR><TD CLASS="quote">
yea, i finished my B swap, then about a month later, up'd the stakes and went with a K swap....and that got stolen about 3 1/2 months after i got it done. but the car was recovered and i got some of the stuff back and now is in the rebuild process yet again. this time tho, i started off with a similar, but black, solid 61lb Alarm System just like you, and a .45 </TD></TR></TABLE>
I read your thread you sent, that is crazy! I'm glad you atleast whooped their ***. I hear ya' with the 61lb alarm and the .45 they usually do the trick.
yea, i finished my B swap, then about a month later, up'd the stakes and went with a K swap....and that got stolen about 3 1/2 months after i got it done. but the car was recovered and i got some of the stuff back and now is in the rebuild process yet again. this time tho, i started off with a similar, but black, solid 61lb Alarm System just like you, and a .45
</TD></TR></TABLE>I read your thread you sent, that is crazy! I'm glad you atleast whooped their ***. I hear ya' with the 61lb alarm and the .45 they usually do the trick.
Thread Starter
Honda-Tech Member
Joined: Jul 2003
Posts: 2,480
Likes: 0
From: War Eagle, Atlanta
Re: (fventura03)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fventura03 »</TD></TR><TR><TD CLASS="quote">damn that dog is mean!
car is nice too!</TD></TR></TABLE>
Thank you sir.
car is nice too!</TD></TR></TABLE>
Thank you sir.