I've been thinking about getting these mounts for awhile and only heard a few reviews over them. How do they compare to Hasport motor mounts? The Innovative billet mount kit seems to be the favor on these.

 

Id like to know also, But from what ive read the prices of the Hasports arent as bad as they use to be.

 

I have a set of the black billet mounts, but I have not used them yet.

 

haha me too, mine are currently sitting in the box they came in My boyfriend uses them and loves em

 

I obviously don't want to get involved in this, other than to say to check the prices on Hasport stuff through dealers like Full-Race, No Limit Motorsports, and other H-T sponsors that carry Hasport stuff, you might be surprised at how good of pricing you'll find..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by locash &raquo;</TD></TR><TR><TD CLASS="quote">I obviously don't want to get involved in this, other than to say to check the prices on Hasport stuff through dealers like Full-Race, No Limit Motorsports, and other H-T sponsors that carry Hasport stuff, you might be surprised at how good of pricing you'll find..</TD></TR></TABLE>

Best I found HaSport mounts for B-series swap was $375 shipped and Innovative were $295 shipped for the billet mounts.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DFW &raquo;</TD></TR><TR><TD CLASS="quote">

Best I found HaSport mounts for B-series swap was $375 shipped and Innovative were $295 shipped for the billet mounts.</TD></TR></TABLE>
I guess Ill be getting Innovative

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMRice &raquo;</TD></TR><TR><TD CLASS="quote">I guess Ill be getting Innovative </TD></TR></TABLE>

Try it out

 

anyone else use them yet?

 

I got them and no complaints

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JohnShiwota &raquo;</TD></TR><TR><TD CLASS="quote">I got them and no complaints </TD></TR></TABLE>

what's your set up?

 

93 Integra with a ITR swap with their cable to hydro conversion

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JohnShiwota &raquo;</TD></TR><TR><TD CLASS="quote">93 Integra with a ITR swap with their cable to hydro conversion</TD></TR></TABLE>

how long have you had the mounts and the cable to hydro conv?

 

Innovative gets a in our race program. We've been on the black steel mounts with the black inserts and they've stood up to the abuse this past race season. We are ready to step up to the grey insert billet mounts. Great product and excellent service!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllMotorRandy &raquo;</TD></TR><TR><TD CLASS="quote">Innovative gets a in our race program. We've been on the black steel mounts with the black inserts and they've stood up to the abuse this past race season. We are ready to step up to the grey insert billet mounts. Great product and excellent service! </TD></TR></TABLE>

good to hear

anyone else?

 

Don't feel like typing up my review again, so here's a link where i spoke about them.

https://honda-tech.com/zerothread?id=1717856

The only problem i had, was that one tranny bolt needs to be replaced for a .5-1 inch longer one. You could read more about it in the link.

Ali

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrinceAli132 &raquo;</TD></TR><TR><TD CLASS="quote">Don't feel like typing up my review again, so here's a link where i spoke about them.

https://honda-tech.com/zerothread?id=1717856

The only problem i had, was that one tranny bolt needs to be replaced for a .5-1 inch longer one. You could read more about it in the link.

Ali</TD></TR></TABLE>

thanks for that

maybe i might go with hasports...?

 

I just installed a set of innovative mounts in my car. I got the aluminum replacements with the 85a poly inserts.


Installed





each mount I replace weighed a few oz less then the stock ones. I was also able to eliminate the front two torque mounts and AC bracket (lots of weight saved there). So far i'm very happy with them and the customer service!!

 

did you run into any problems installing the mounts?

 

With the billet mounts (aluminum) I had to replace one of the bolts for the rear mount. I found out that the AC bracket mount bolt works great to replace the bolt that is two short.

I installed the mounts when I replace the motor. I did find that lining up the mounts to the chassis a little more difficult due to the fact that they don't flex at all (i had stock in there before). That is to be expected tho

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BrianZ &raquo;</TD></TR><TR><TD CLASS="quote">With the billet mounts (aluminum) I had to replace one of the bolts for the rear mount. I found out that the AC bracket mount bolt works great to replace the bolt that is two short.


</TD></TR></TABLE>

the oem ac bracket mount bolt? it seems everyone that i've seen that have them, like the guy in the other post, are having the same problem.

 

I hope you don't mind me using your pic, if you want me to take it down just let me know. I also had to replace this bolt (green arrow)



Ali

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Battle23 &raquo;</TD></TR><TR><TD CLASS="quote">

the oem ac bracket mount bolt? it seems everyone that i've seen that have them, like the guy in the other post, are having the same problem.</TD></TR></TABLE>

I belive its a "problem" with any engine mount company. I have helped install another very popular brand or ending mounts with the same "problem". Usually a quick trip to the hardware store will fix the "problem"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by PrinceAli132 &raquo;</TD></TR><TR><TD CLASS="quote">I hope you don't mind me using your pic, if you want me to take it down just let me know. I also had to replace this bolt (green arrow)



Ali</TD></TR></TABLE>

no worries.. I never copyrighted that pic anyhow..lol

Your right, That bold should be replace too.

 

bump...