Drag Racing Drag Racing (legal) & Associated Topics

Ran my hatch finally, (HDMgreenhatch) mild setup....

Thread Tools
 
Search this Thread
 
Old Oct 10, 2006 | 09:24 AM
  #1  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Ran my hatch finally, (HDMgreenhatch) mild setup....

Well, we ran my hatch finally after built it 18 motnhs ago, (it is a daily driven car). The only issue we had was the tranny (way too short, B16), and was hitting rev limiter way before 1320 mark making it slow down on top. Maybe we'll swap the tranny and give it a try again. Not bad for a mild setup:

81mm Ls block
9.1:1 je pistons
eagle rods
umported b16 head
omni springs & retainers
precision sc61 (52 trim) @ 26psi
neukin turbo manifold
pt 880cc injectors
Crome ems

60 '... 1.760
330... 4.733
1/8... 6.972
mph...113.10
1000...8.869
1/4 ...10.463
mph...138.86

Here's the video:
http://www.tunedbycft.com/videos/hdmgreenhatch.wmv

Reply
Old Oct 10, 2006 | 09:40 AM
  #2  
BoostedJeff's Avatar
 
Joined: Jul 2003
Posts: 38,620
Likes: 0
From: Baltimore, MD
Default Re: Ran my hatch finally, (HDMgreenhatch) mild setup.... (hybrixt)

wow... very nice simple setup. very impressive
Reply
Old Oct 10, 2006 | 11:26 AM
  #3  
speeddave's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 2,003
Likes: 0
From: edmo, AB, Canada
Default Re: Ran my hatch finally, (BoostedJeff)

what size slicks were you using?
Reply
Old Oct 10, 2006 | 11:29 AM
  #4  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (speeddave)

24.5" x 7
Reply
Old Oct 10, 2006 | 11:31 AM
  #5  
speeddave's Avatar
Honda-Tech Member
 
Joined: Dec 2001
Posts: 2,003
Likes: 0
From: edmo, AB, Canada
Default Re: Ran my hatch finally, (hybrixt)

thanks, what are you revving your ls/vtec to?
Reply
Old Oct 10, 2006 | 12:14 PM
  #6  
wolve's Avatar
Honda-Tech Member
 
Joined: Feb 2005
Posts: 1,921
Likes: 1
From: netherlands
Default Re: Ran my hatch finally, (HDMgreenhatch) mild setup.... (hybrixt)

sleeves?????
Reply
Old Oct 10, 2006 | 12:21 PM
  #7  
beaver's Avatar
 
Joined: Sep 2005
Posts: 698
Likes: 0
From: Baton Rouge, LA
Default Re: Ran my hatch finally, (wolve)

What kind of hp is the car making? Thing gets out the hole pretty good.
Reply
Old Oct 10, 2006 | 12:57 PM
  #8  
turboedc2's Avatar
Honda-Tech Member
 
Joined: May 2005
Posts: 951
Likes: 0
From: Lawrence,, Mass
Default Re: Ran my hatch finally, (beaver)

**** was out hdmmotorsports always got good vids...
Reply
Old Oct 10, 2006 | 02:21 PM
  #9  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (beaver)

It's got the darton replacement sleeves.
rev limiter is set at 9100rpms.
The car made 589whp @ 26psi.
Reply
Old Oct 10, 2006 | 04:04 PM
  #10  
G2K's Avatar
G2K
Junior Member
 
Joined: Apr 2004
Posts: 494
Likes: 0
From: South, FL
Default Re: Ran my hatch finally, (hybrixt)

would this be viejo's hatch?
Reply
Old Oct 10, 2006 | 04:29 PM
  #11  
M.A.R.C.'s Avatar
Honda-Tech Member
 
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Default Re: Ran my hatch finally, (DooDoo Brown Racing)

saw this on a local forum. bad *** ****. shows u don't need an over-done setup to run well.

what's the suspension setup? if you don't mind me asking?
Reply
Old Oct 10, 2006 | 04:46 PM
  #12  
nerdsports's Avatar
Honda-Tech Member
 
Joined: Oct 2002
Posts: 5,401
Likes: 0
From: Tampa
Default Re: Ran my hatch finally, (M.A.R.C.)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by M.A.R.C. &raquo;</TD></TR><TR><TD CLASS="quote">saw this on a local forum. bad *** ****. shows u don't need an over-done setup to run well.

what's the suspension setup? if you don't mind me asking?
</TD></TR></TABLE>

I am also interested in the suspension setup (traction bars, etc?).

Nice run. Simple setup kicking ***.
How much does the car weigh?
Reply
Old Oct 11, 2006 | 06:54 AM
  #13  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (DooDoo Brown Racing)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DooDoo Brown Racing &raquo;</TD></TR><TR><TD CLASS="quote">would this be viejo's hatch?</TD></TR></TABLE>

Nope, Viejo's hatch is the same color and similar setup but it's not finished yet.
This is my hatch.
We got 2 green hatches.
Reply
Old Oct 11, 2006 | 06:55 AM
  #14  
Innes's Avatar
iTrader: (3)
 
Joined: Nov 2005
Posts: 12,226
Likes: 1
From: Orlando, FL, USA
Default Re: Ran my hatch finally, (hybrixt)

looking good guys
Reply
Old Oct 11, 2006 | 07:00 AM
  #15  
Humble Performance's Avatar
Honda-Tech Member
 
Joined: Nov 2003
Posts: 3,155
Likes: 0
From: Tulsa, OK, U.S.
Default Re: Ran my hatch finally, (MazworxRaceSupply)

Congrats on the times ! Put a GSR tranny in there and run some better #'s.
Reply
Old Oct 11, 2006 | 07:02 AM
  #16  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (M.A.R.C.)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by M.A.R.C. &raquo;</TD></TR><TR><TD CLASS="quote">saw this on a local forum. bad *** ****. shows u don't need an over-done setup to run well.

what's the suspension setup? if you don't mind me asking?
</TD></TR></TABLE>
We don't mind at all.
Believe it or not the suspension is as follows:
Stock struts with ebay blue coilovers.
ingalls camber kit.
Titanium traction bars (bought them from Titan Motorsports, ask for Geo).
Strut bars.
Hasport motor mounts kit. (hydro to cable conversion).
Phantom grip (green springs)
Act extreme pressure plate with clutchnet 4puck sprung disk.
Reply
Old Oct 11, 2006 | 09:46 AM
  #17  
M.A.R.C.'s Avatar
Honda-Tech Member
 
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Default Re: Ran my hatch finally, (hybrixt)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrixt &raquo;</TD></TR><TR><TD CLASS="quote">We don't mind at all.
Believe it or not the suspension is as follows:
Stock struts with ebay blue coilovers.
ingalls camber kit.
Titanium traction bars (bought them from Titan Motorsports, ask for Geo).
Strut bars.
Hasport motor mounts kit. (hydro to cable conversion).
Phantom grip (green springs)
Act extreme pressure plate with clutchnet 4puck sprung disk.</TD></TR></TABLE>



Reply
Old Oct 12, 2006 | 08:12 AM
  #18  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (M.A.R.C.)

The car weights 2560 with driver.
Reply
Old Oct 12, 2006 | 08:22 AM
  #19  
Gravy's Avatar
Honda-Tech Member
 
Joined: Feb 2003
Posts: 2,466
Likes: 0
From: South, Florida, USA
Default Re: Ran my hatch finally, (hybrixt)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hybrixt &raquo;</TD></TR><TR><TD CLASS="quote">The car weights 2560 with driver.</TD></TR></TABLE>
you guys coming down for the moroso event next month?
Reply
Old Oct 12, 2006 | 09:06 AM
  #20  
M.A.R.C.'s Avatar
Honda-Tech Member
 
Joined: Oct 2001
Posts: 6,024
Likes: 0
From: Pembroke Pines, Florida, United States
Default Re: Ran my hatch finally, (Gravy)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gravy &raquo;</TD></TR><TR><TD CLASS="quote">you guys coming down for the moroso event next month?</TD></TR></TABLE>

shhh!! what you trying to do to me!!!
Reply
Old Oct 12, 2006 | 09:45 AM
  #21  
2fast4u831's Avatar
I'm really 2slow
20 Year Member
Liked
 
Joined: Jan 2004
Posts: 8,987
Likes: 7
From: near Laguna Seca CA, USA
Default Re: Ran my hatch finally, (M.A.R.C.)

fast car with a simple setup.
Reply
Old Oct 12, 2006 | 10:21 AM
  #22  
92redhatch's Avatar
Honda-Tech Member
 
Joined: Jan 2006
Posts: 2,449
Likes: 1
From: miami, fl, usa
Default

great setup. Quick question what turbo would be bigger a sc61 52 trim or a t3t04e 57 trim?
Reply
Old Oct 12, 2006 | 10:24 AM
  #23  
beaver's Avatar
 
Joined: Sep 2005
Posts: 698
Likes: 0
From: Baton Rouge, LA
Default Re: (92redhatch)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92redhatch &raquo;</TD></TR><TR><TD CLASS="quote">great setup. Quick question what turbo would be bigger a sc61 52 trim or a t3t04e 57 trim?</TD></TR></TABLE>

SC61 is bigger
Reply
Old Oct 12, 2006 | 12:15 PM
  #24  
deryck324's Avatar
Honda-Tech Member
 
Joined: Feb 2006
Posts: 545
Likes: 0
From: maryland, us
Default

nice times and great vid
Reply
Old Oct 12, 2006 | 12:57 PM
  #25  
hybrixt's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2004
Posts: 138
Likes: 0
From: Deltona, Fl
Default Re: Ran my hatch finally, (Gravy)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gravy &raquo;</TD></TR><TR><TD CLASS="quote">
you guys coming down for the moroso event next month?</TD></TR></TABLE>

Maybe....if we solve the issues with the clutch on the white hatchback,
it really sucks that we haven't been able to run it since it's got more power...we'll see. Hopefully we'll be there.
Reply



All times are GMT -8. The time now is 01:50 PM.