took the stock k20a2 hatch to HRP in houston and was amazed at what this stock motor did

R/T--------.325
60ft-------1.689
1/8th------7.096
MPH------103.36
1000ft-----9.113
1/4th------10.809
MPH-------131.06

GR35R T4, precision 750hp fmic, 4"dp, tial 44mm wg, tial 50mm bov, 33psi, boost controlled by kpro boost by gear

ran on 25x8.7x13 MH
car weights in at 2345 with driver

engine is bone stock k20a2 with itr intake manifold, spoon throtle body and quaife lsd on the 6spd tranny, axles are hasport stg1

car was spinning all 3rd and 4th gear on that run

this motor has more, as soon as we fix the traction problems, this stock motor should be a beast

 

Awesome man. I thought you were putting a built motor in after the k24 blew? Have you put the new setup on the dyno? Man i wish i could get my car to weigh that, mine is a pig.

 

Keep pushing the limits.

 

Was St00pid apart of this by chance? lol
Congrats!!!
You gonna come down and play for Midnight madness? its in 2 weeks

 

jason is always a part of this.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by alopez84 &raquo;</TD></TR><TR><TD CLASS="quote">Was St00pid apart of this by chance? lol
Congrats!!!
You gonna come down and play for Midnight madness? its in 2 weeks</TD></TR></TABLE>

durr, u slow **** ill be at import face-off at ennis

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by beaver &raquo;</TD></TR><TR><TD CLASS="quote">Awesome man. I thought you were putting a built motor in after the k24 blew? Have you put the new setup on the dyno? Man i wish i could get my car to weigh that, mine is a pig.</TD></TR></TABLE>

i got a deal on this one and i needed the car running while i get the other motor built

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sir2egk &raquo;</TD></TR><TR><TD CLASS="quote">GR35R T4, precision 750hp fmic, 4"dp, tial 44mm wg, tial 50mm bov, 33psi, boost controlled by kpro boost by gear

engine is bone stock k20a2 </TD></TR></TABLE>

is this a typo??

 

throw enough fuel at it and it'll hold together!

awesome man...

power level? 600-700?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wolve &raquo;</TD></TR><TR><TD CLASS="quote">

is this a typo?? </TD></TR></TABLE>


NOPE

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by redzcstandardhatch &raquo;</TD></TR><TR><TD CLASS="quote">throw enough fuel at it and it'll hold together!

awesome man...

power level? 600-700?</TD></TR></TABLE>

dunno, dyno was tripin, but last number before dyno shut down was
588whp

 

so whats the deal onix? are you going to send me that downpipe to complete the turbo kit we bought from you or what? who knows maybe we see you in dallas. :-/

til i get that downpipe.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sir2egk &raquo;</TD></TR><TR><TD CLASS="quote">engine is bone stock k20a2 </TD></TR></TABLE>

stock as in, stock rods, pistons and sleeves?

DAAYUMMMM!!!!!!!!

K-series FTW!

 

Nice car have you the 588 whp on the stock engine?

 

Impressive

 

Nice. Man have the times changed

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 &raquo;</TD></TR><TR><TD CLASS="quote">Nice. Man have the times changed </TD></TR></TABLE>


You got that right!!! Running 10's on a bone stock engine and making well over 500whp. On top of that its not a full race car. Probably still drives it on the street

 

Good Job, If your having traction problems now?,.....what are your plans when you get the fully built K24 in that thing?

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ringgold &raquo;</TD></TR><TR><TD CLASS="quote">


You got that right!!! Running 10's on a bone stock engine and making well over 500whp. On top of that its not a full race car. Probably still drives it on the street </TD></TR></TABLE>

drove it last wednesday, but gets lotta eye attencion and its loud

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by darkdayz &raquo;</TD></TR><TR><TD CLASS="quote">Good Job, If your having traction problems now?,.....what are your plans when you get the fully built K24 in that thing?</TD></TR></TABLE>


yep, at track it spins 3rd and 4th, on street you already know, it spins in 5th gear

new motor should yield 800whp and track times will see and also will be driven on the street

 

nice time..i know it had it in it...

 

dont mean to hate or anything, but.. 588 out of a k series with a t4 35r on 33lbs???

 

If you're cutting 1.6 60 foot times, you can't be having TOO much of a traction problem. Nice times man!

 

not hard to believe the stock sleeves held up, or that u ran that time, but hard to believe the stock pistons didnt melt like butter at 33psi...but those numbers on a stock motor is sickkkk.

 

well i guess 45psi was just to much for this motor. haha

 

This is hard to belive..But congrats none the less

 

oh well he will prob scam someone else for money to buy a new one.

read the sig