Could someone tell me which way is the right way for these pistons?




Modified by IntegraTionR at 9:54 PM 10/6/2006


Modified by IntegraTionR at 2:57 AM 10/9/2006

 

fix the pic, it dont work

 

From that picture it looks like the are installed correctly.

 

which side is in which side is out?

 

top of the picture is exhaust, bottom is intake...

that's what it looks like compared to this picture...

 

No Gator, not in referance to the block. I mean by looking at the piston itself and just the piston. Which groove is in and which is exhaust. Im asking this because these pistons doesnt have any arrows to show which side its suppose to go!

 

oopps sorry, i didnt realize my post was in reply to you...i though someone else was asking which way the block is facing... on me

 

here is a very stupid guess, but the intake valves are bigger than the exhaust correct?

if you look at the piston, in between where the valve reliefs are, the top is a little wider than the bottom one in the picture...maybe to give more clearance for the intake valves?

 

You can tell that much? I cant see that for some reason??? but what I see is the groove on the top or steeper then the groove on the bottom?

 

I editted the pic so you can see what he's talking about.

 

Wait!!! So looking at Tone.Ster's picture, the blue is exhaust and red is intake? and is the piston direction correct then?


Modified by IntegraTionR at 11:26 PM 10/8/2006


Modified by IntegraTionR at 11:27 PM 10/8/2006