FS: Mugen Micro Mesh Brake Line... i used it less then 3000 miles on my integra ... reason i am selling it because i am selling my car... brand new cost $352...and i am taking best offers.... $OLD





Mugen’s Micro Mesh brake line uses braided wire of approximately 0.21 mm formed by braiding seven ultra-fine strands in place of the stainless steel wire (approx. 0.3 mm per strand) used in conventional stainless-steel-braid reinforced hoses. This greatly increases flexibility and dramatically improves fatigue durability, which is a shortcoming with conventional hoses. The Teflon material used for the inner tubing has also been improved to provide increased tube durability. As a result, this is the first stainless-steel-braid reinforced hose to acquire FMVSS (Federal Motor Vehicle Safety Standards) No. 106 certification. Mugen Micro Mesh brake lines surpass the standards for compliant brake hoses, and ensure safety and a degree of direct pedal responsiveness that cannot be achieved with rubber brake hoses. The products are sold as a four-piece set for one vehicle. They are critical safety components complying with safety standards, and must be installed by an authorized dealer.


Modified by wanna b R at 1:50 PM 10/12/2006

 

bump

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wanna b R &raquo;</TD></TR><TR><TD CLASS="quote">bump</TD></TR></TABLE>

 

ttt

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wanna b R &raquo;</TD></TR><TR><TD CLASS="quote">ttt</TD></TR></TABLE>

 

dope

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NIKE SB’d &raquo;</TD></TR><TR><TD CLASS="quote">dope </TD></TR></TABLE>

thanks

 

bump!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wanna b R &raquo;</TD></TR><TR><TD CLASS="quote">bump!</TD></TR></TABLE>

 

bump...