ran my d16y7/y8 (stock trim) turbocharged.i cut .623 light w/1.80 60ft. on 22x9x13 M&H.....................13.7@97mph on 7psi....................NOW it's 10psi w/550injectors and street TUNE..........................HOPEFULLY low low 13's or even 12.999999......................................... .we'll just have to see!

 

hp #s

 

don't know,after i ran that on 7psi i turned around and put a 10.1psi wg spring in then got it dynoed................NOW it's 184hp/160tq just wondering if that's enough for 12's or low 13's on the same size slicks

 

my friend recently went 11.8 on a single.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rota92 &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

lol, i appologize if this was to showcase his numbers, i thoguht it was post up good numbers, so i posted my friends, lol if this was a thread he made just for himself, i appologize.

 

that's COOL,NOW the cars at 12psi and running straight......................we'll just have to wait and see if i hit over 100mph into the 12's

 

all hail the mighty D

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kamakaze1 &raquo;</TD></TR><TR><TD CLASS="quote">that's COOL,NOW the cars at 12psi and running straight......................we'll just have to wait and see if i hit over 100mph into the 12's</TD></TR></TABLE>

lol i hit 12.9 and i went 105, so 97 isnt gonna happen, lol.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92 EH2 &raquo;</TD></TR><TR><TD CLASS="quote">

lol i hit 12.9 and i went 105, so 97 isnt gonna happen, lol.</TD></TR></TABLE>

you guys need to read more he was pulling 97mph on 7psi he is at 12 psi now

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bserieskllr &raquo;</TD></TR><TR><TD CLASS="quote">you guys need to read more he was pulling 97mph on 7psi he is at 12 psi now</TD></TR></TABLE>

but only made 184...

 

NOW....................................NOW i'm on 12psi...........................looking to definitely dip into the 12's with NO...........................i mean NO neptune,hondata,chrome,uberdata................... .......just OBD2b w/SAFC

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kamakaze1 &raquo;</TD></TR><TR><TD CLASS="quote">NOW................................. ...NOW i'm on 12psi...........................looking to definitely dip into the 12's with NO...........................i mean NO neptune,hondata,chrome,uberdata................... .......just OBD2b w/SAFC</TD></TR></TABLE>

im not tryign to say you cant, but if you made 184, if that was on lower boost than 12, than you have a chance, good luck...

 

that will be hard kinda hard running 12.9 with only 97 mph. on my stock motor with slicks i ran 13.4@107 with 7 lbs., what kind of turbo are u running? whats your setup.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kenpo &raquo;</TD></TR><TR><TD CLASS="quote">that will be hard kinda hard running 12.9 with only 97 mph. on my stock motor with slicks i ran 13.4@107 with 7 lbs., what kind of turbo are u running? whats your setup.</TD></TR></TABLE>

were you on slicks? cause 107 is 12.8 area.

 

What's............................................ .....................with the .................................................. ..........?

 

Traction is fine you need more mph and you are in the money

 

i have a GT30r precision ball bearing on a RCautoworks stainless tubular log manifold that sits the turbo up high.it creates boost at around 4000rpm,and i take it to 7500rpm.i'm thinking that the TURBO might be to BIG for the stock motor and what i'm trying to achieve

 

imangine what you could do with a good management system

 

lol @ spending tons of cash on a Gt30r and using a SAFC for tuning.

 

WELL,spent a total of 825.00 to piece together the turbo kit...................it included the GT30R..................................THE COMPLETE KIT even the welding on the oil pan

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kamakaze1 &raquo;</TD></TR><TR><TD CLASS="quote">WELL,spent a total of 825.00 to piece together the turbo kit...................it included the GT30R..................................THE COMPLETE KIT even the welding on the oil pan</TD></TR></TABLE>

?

Are you serious!? GT30Rs typically run over $1200 by themselves.

Are you sure it's a GT30R? I just can't imagine someone being stupid enough to give one away for that cheap.

 

J/K spent a little more then that,but,he did'nt have any need for it he's NA

 

BTW selling the car,GO and take a LOOK pics are kinda sorry but there PICS........

 

 

THANKS