How much WHP can a stock S2000 Rear End hold???
Thread Starter
Joined: Oct 2003
Posts: 5,899
Likes: 0
From: atlanta, ga, usa
How much WHP can a stock S2000 Rear End hold???
Apparently not much past 600whp 
Seymour getting friendly
This is our Turbo S2000, we went out an played with the 2Step feature with the AEM before a race we are going to attend tomrrow. Well, one good 4500 rpm launch later, pieces were on the ground.
We are fabbing up something now to fix it before tomrrow. Nissan rear end FTW
Seymour getting friendly
This is our Turbo S2000, we went out an played with the 2Step feature with the AEM before a race we are going to attend tomrrow. Well, one good 4500 rpm launch later, pieces were on the ground.
We are fabbing up something now to fix it before tomrrow. Nissan rear end FTW
Honda-Tech Member
Joined: Aug 2002
Posts: 17,222
Likes: 3
From: SoCal
Re: (5 Speed AP2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 5 Speed AP2 »</TD></TR><TR><TD CLASS="quote">I hate it when that happens. </TD></TR></TABLE>
no sh-t blew diff. has a very rotten egg smells to it, we did a tranny swap on a 4g63 the last summer and it was a pain in the butt
</TD></TR></TABLE>no sh-t blew diff. has a very rotten egg smells to it, we did a tranny swap on a 4g63 the last summer and it was a pain in the butt
ya any gear oil= teh stank
Trending Topics
Thread Starter
Joined: Oct 2003
Posts: 5,899
Likes: 0
From: atlanta, ga, usa
Re: How much WHP can a stock S2000 Rear End hold??? (Francesco)
well we got Import Showdown tomrrow, so we have to come up with something FAST.
heres what we settled on:
240sx Rear End/Diff, welded of course lol
Spacer we had to weld to allow us to use the stock S2K driveshaft. Its Saturday so we cant get a Driveshaft made.
Adapter plate to make the S2K axles bolt to the new 240 housing
About to pull it out of the shop, ill let you guys know if it work/holds over the weekend.
heres what we settled on:
240sx Rear End/Diff, welded of course lol
Spacer we had to weld to allow us to use the stock S2K driveshaft. Its Saturday so we cant get a Driveshaft made.
Adapter plate to make the S2K axles bolt to the new 240 housing
About to pull it out of the shop, ill let you guys know if it work/holds over the weekend.
Member
Joined: Jun 2001
Posts: 2,888
Likes: 0
From: Dothan, AL
Re: How much WHP can a stock S2000 Rear End hold??? (HybridHatch88)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HybridHatch88 »</TD></TR><TR><TD CLASS="quote">Wow, you guys work fast. </TD></TR></TABLE>
Ditto. How did it work out?
Ditto. How did it work out?
Thread Starter
Joined: Oct 2003
Posts: 5,899
Likes: 0
From: atlanta, ga, usa
Re: How much WHP can a stock S2000 Rear End hold??? (DohcSide)
the diff held BEAUTIFULLY at the track, however, we broke the Aluminum Mounts with the urethane bushings, pretty much the only thing on the rear end that is still factory LOL.
We will be making solid mounts this week and i ll have pics . At low boost it ran 12.0 (14psi)
We will be making solid mounts this week and i ll have pics . At low boost it ran 12.0 (14psi)
Thread
Thread Starter
Forum
Replies
Last Post
THE GAME IS THICK
Honda S2000
14
Aug 25, 2006 03:04 PM
