Please Bump if you view i need to move this stuff soon!

Well I'm finally done with this motor. After 3 dyno sessions and countless hours spent on it i am ready to move onto something else. All of these parts have minimal miles on them and are in near perfect condition. This overall motor set- up yeilded me 225whp and 155 ft-lbs. on a dynapack. Here is a break down on what i have for sale and what is available. All of these parts are located in Irvine at Plan B if you want to stop by and check them out, but PLEASE dont waste my time or yours if you are not serious.

98 USDM GSR block with vins (original from car) Bored to 82mm. Bore, hone, and deck done by RS machine. Micro polished crank done by RS machine Comes 100% complete with RS machine CTR pistons and even a flywheel!!!! - SOLD!!!!

ITR intake manifold ported by RS machine (runners and plenum) Complete with sensors - $225





Blox Competition HSL cams - $325


Hondata intake manifold gasket - $30



Toda valvesprings (complete set of 16) - $300



Skunk2 Titanium retainers - SOLD!!!
68mm tapered to 64 mm RC throttle body Complete with sensors - SOLD!!!!
AEM UEGO Wideband o2 with o2 sensor - SOLD!!!!
Skunk2 pro series cam gears - SOLD!!!




Modified by dohcMONSTER at 12:40 PM 10/12/2006

 

uppity

 

omg ur parting it out why I liked ur setup so good

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMLS4dr200whp &raquo;</TD></TR><TR><TD CLASS="quote">omg ur parting it out why I liked ur setup so good </TD></TR></TABLE>
thanks, yea im moving onto a new project . TTT

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>

 

ttt

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote">ttt</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AMLS4dr200whp &raquo;</TD></TR><TR><TD CLASS="quote">omg ur parting it out why I liked ur setup so good </TD></TR></TABLE>

 

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote"></TD></TR></TABLE>

 

クモンスター

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote">クモンスター </TD></TR></TABLE>

 

up to the top!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote"> up to the top! </TD></TR></TABLE>

 

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>

 

 

Might want your throttle body.... i'll know by tonight

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by iH8RICERZ &raquo;</TD></TR><TR><TD CLASS="quote">Might want your throttle body.... i'll know by tonight </TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

call me!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote">

call me!</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dohcMONSTER &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

ttt

 

Hey just wanted to ask you what fuel you tuned on and what management system, since your numbers are great & I am putting together a very similar setup and would like to achieve something close.