MINI ME

Reply Subscribe

Thread Tools

Search this Thread

Sep 25, 2006 | 06:43 AM

4thgenx42

Thread Starter

Honda-Tech Member

Joined: Aug 2006

Posts: 881

Likes: 0

From: Lawrence, Ma, USA

***MINI ME***

When doing a Mini Me swap, do I need to drill anything oil lines like the LS-VTEC setup? Is it just a matter of dropping the head in and doing the wiring harness? Any info would be helpful...

Sep 25, 2006 | 06:53 AM

ZacCarter

Honda-Tech Member

iTrader: (1)

Joined: Aug 2002

Posts: 10,758

Likes: 0

From: East, TN

https://honda-tech.com/zerothread?id=554053

Sep 25, 2006 | 01:36 PM

UberMunkey

Junior Member

Joined: Jun 2005

Posts: 308

Likes: 0

From: MA

Re: ***MINI ME*** (4thgenx42)

no drilling, but depending on which parts are being used you may have to remove an oil galley plug. what block/head combo are you doing?

Sep 26, 2006 | 04:18 AM

4thgenx42

Thread Starter

Honda-Tech Member

Joined: Aug 2006

Posts: 881

Likes: 0

From: Lawrence, Ma, USA

Im doing the 99 soch block with a 99 head. I believe thats a D16y7 block with a D16y8 head.

Sep 26, 2006 | 07:52 AM

b20z2

Joined: Jun 2004

Posts: 46

Likes: 0

Re: (4thgenx42)

Nothing to remove or drill.
just bolt it on.
I used a d16z6 head gasket when i did the head swap on my 92dx.
You car will pull better,on the top end, with the new head.