D series cams
Thread Starter
Honda-Tech Member
Joined: Dec 2005
Posts: 580
Likes: 1
From: wi, usa
Re: D series cams (driveahonda)
several? the only one that i can find is crane, and they discontinued it. Im not too thrilled about getting a regrind either, i'll check out delta, what other companies are you thinking of?
Honda-Tech Member
Joined: Oct 2004
Posts: 5,866
Likes: 1
From: nj
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
Re: D series cams (Mr.speaker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr.speaker »</TD></TR><TR><TD CLASS="quote">http://exospeed.com</TD></TR></TABLE> Thanks.
D16A6, stock block, bolt ons, full Exospeed headwork with SR909/Stg 2 cam, with ECU rev limit to 8000 RPM.
This setup did 142 to the wheels at best. Did 13.60 with this exact combination.
D16A6, stock block, bolt ons, full Exospeed headwork with SR909/Stg 2 cam, with ECU rev limit to 8000 RPM.
This setup did 142 to the wheels at best. Did 13.60 with this exact combination.
Honda-Tech Member
Joined: Sep 2002
Posts: 5,647
Likes: 29
From: colorado springs, co, usa
Re: D series cams (SiRay13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRay13 »</TD></TR><TR><TD CLASS="quote">the only one that i can find is crane, and they discontinued it.</TD></TR></TABLE>
http://store.summitracing.com/...w=sku
http://store.summitracing.com/...w=sku
Trending Topics
Honda-Tech Member
Joined: Mar 2002
Posts: 12,899
Likes: 1
From: www.exospeed.com, Valencia, CA
Re: D series cams (SiRay13)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SiRay13 »</TD></TR><TR><TD CLASS="quote">i've called your company about 20 times, left messages, emails and no answers</TD></TR></TABLE>
pmed.
pmed.
Thread
Thread Starter
Forum
Replies
Last Post
