turbo intake or exhaust manifold? need help 14b mitsu for b18c teg
Guest
Posts: n/a
do i go with the intake manifold or the exhaust manifold? i have a 94 teg with a b18c i thought that you only need the exhaust manifold to run the turbo off ? i have a 14b turbo from a 97 mitsu help please i know nothing!!!
Guest
Posts: n/a
i do not understand where the turbo is attached to the intake manifold or the exhaust manifold or both??? like i said before i know nothing !!! please teach me!!!
lol this is a funny post.
Exhaust manifold goes to the turbo. After the turbo is intercooling piping, the intercooler, then back to the throttle body, into the intake manifold.
Go to http://www.turbobygarrett.com and click turbo tech, and read turbo tech 101, 102, and 103. Then read them a few more times till you understand everything really well. Good luck
Exhaust manifold goes to the turbo. After the turbo is intercooling piping, the intercooler, then back to the throttle body, into the intake manifold.
Go to http://www.turbobygarrett.com and click turbo tech, and read turbo tech 101, 102, and 103. Then read them a few more times till you understand everything really well. Good luck
just so u know u just can't slap a turbo kit on, i read lots and learned to understand it all, i've sseen some people just slap a turbo on and not know anything used stock injectors and noe fuel management motor went at 4 psi, it was funny cuze we hate him but don't waste ur money do it right the first tiem, and if u are doing a home/made turbo setup go with a 16g instead a 14b pushes alot more CFM, just some of my 2 cents
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by noobical »</TD></TR><TR><TD CLASS="quote">no **** bro!! alli need is a exhaust manifold i got everything else !!</TD></TR></TABLE>
Please list what you have
Please list what you have
what size inejctors? And is your only tuning method the SAFC? If so, I would recommend getting yuor ecu chipped and tuend with a proper EMS. One taht doesn't skew the map signal to alter fuel trims.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by noobical »</TD></TR><TR><TD CLASS="quote">boost and air fuel gauges, turbo timer, SAFC, fpr, oil cooler,all piping,fmic,oil lines, td05 14b turbo with internal wastegate, etc.....
</TD></TR></TABLE> For having all this stuff you sure are pretty stupid with turbo goods.
</TD></TR></TABLE> For having all this stuff you sure are pretty stupid with turbo goods.
Guest
Posts: n/a
bloW me ur stupid sKid
C===8
NooBical just pimp slapped you! you have offically been nooBical pimp attacked! you dickass
Modified by noobical at 5:02 PM 10/3/2006
Modified by noobical at 5:04 PM 10/3/2006
Modified by noobical at 5:06 PM 10/3/2006
C===8NooBical just pimp slapped you! you have offically been nooBical pimp attacked! you dickass
Modified by noobical at 5:02 PM 10/3/2006
Modified by noobical at 5:04 PM 10/3/2006
Modified by noobical at 5:06 PM 10/3/2006
Thread
Thread Starter
Forum
Replies
Last Post
mkw1
Welding / Fabrication
34
Aug 11, 2008 04:43 PM





