Ran a 15.1 in my DA....
Well...i ran for the first time at battle of the imports here in Illinois..I sucked...LOL
Car was launched from 3.5-4k. Slipped the clutch, but I still couldnt get traction. Tires were Kumho V700 Road race Tires set at 18 psi.
Modified by J's 94 Accord at 11:09 PM 3/6/2007
Car was launched from 3.5-4k. Slipped the clutch, but I still couldnt get traction. Tires were Kumho V700 Road race Tires set at 18 psi.
Modified by J's 94 Accord at 11:09 PM 3/6/2007
Hey Dave,
I was there when Joe was asking you about the tire pressure for my car. When we dropped it down to about 15 psi, the air leaked out from the rim, so I didnt end up running at all...only got 2 runs.
I was there when Joe was asking you about the tire pressure for my car. When we dropped it down to about 15 psi, the air leaked out from the rim, so I didnt end up running at all...only got 2 runs.
I did a 14.9@94 MPH 2.4 60
1990 DA stripped
B17
Intake
RSR header 2.0" collector
2.25 exhaust
YS1
Custom Cams
It should have hit mid 14's but I had a **** 60 u got lots of room for improvment!
I hit about 20 15.0's with stock cams with the same setup always a 2.4 60 I had crappy all seasons! Get some slicks and giver!
1990 DA stripped
B17
Intake
RSR header 2.0" collector
2.25 exhaust
YS1
Custom Cams
It should have hit mid 14's but I had a **** 60 u got lots of room for improvment!
I hit about 20 15.0's with stock cams with the same setup always a 2.4 60 I had crappy all seasons! Get some slicks and giver!
Trending Topics
I don't know if my friend will get mad...heh But on his old setup he went 13.8 on street tires (falken azenis) in his 91 LS DA.
stock B20 *low compression* block
b18b head
crower valvetrain and 403's
skunk2 manifold
stock b16 thorttlebody bored over
long geared ls ys1 tranny
stock B20 *low compression* block
b18b head
crower valvetrain and 403's
skunk2 manifold
stock b16 thorttlebody bored over
long geared ls ys1 tranny
Thread
Thread Starter
Forum
Replies
Last Post



