Can anyone tell me what the part # is for the wires that the stupid rat chewed. Or better yet what that part is called on top of the fuel rail?.

 

LOL! Thats your injector plug he chewed up.

 

I know its my injector plug but that doesnt come up at the parts websites, I need to know if i cna just replace that specific one or i have to buy the whole set

 

go to a junk yard and get an obd1 plug, considering you have a z6, and if its just eh z6 cover on a y8, get an obd2 plug.

 

Go to a junk yard cut that plug off a car, solder it to yours, use heatshrink... Then feed the rat to a neighbors cat...

 

Junk yard...Can only buy the engine harness from Honda.

 

oh yeah, wanted to add.....that is the craziest thing ive seen for a while. was the car sitting for awhile?

 

Its obd1 its a z6 car doesn't run well enough to drive 1 hour to the nearest junk yard. Can't i just buy a new harness from the junk yard an replace that? Most junk yards I've been to the engines arent inside the cars.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kruzen510 &raquo;</TD></TR><TR><TD CLASS="quote">Junk yard...Can only buy the engine harness from Honda.
</TD></TR></TABLE>

No this crap happened over night, it stormed last night, guessing it crawled in there last night made a quick nest.

 

lmaoooooo the rat is still there!!! did it die there?!? lmfaoooooo!!!!

Anyways junk yards usually don't sell the end plugs "new." not even honda sells the plug ends by itself you gotta buy the entire harness. Your best bet is to go 2 the junkyard and find this plug end and cut it off a z6 harness. If you can't drive down there, get a friend 2 go down for you. If you still can't do that, im sure someone is selling the plug ends here on honda-tech and they can ship it to ya.

 

listen.....you only need one injector clip from someone or a junk yard.

You do not need to replace your entire wire harness, where do you think your going to find one of those? Honda....good luck if you like spending like $350 or more.

Go on the for sale posts and find someone selling injector clips.

have a friend drive you to a junk yard and get one, this is such an easy fix.

Hell, if you dig out the black **** at the top of your injector, there would be more wire in there and you could just solder yours back up and fix it yourself.

If this project is too hard for you maybe you should not work on cars or build yours for performance cause more complicated **** is going to happen along the way.

There's always needle point, or macromae, or knitting that are easier than working on cars!

 

they look the same as my vtecE fuel rail...

 

Accually i gave up on modding my car, It's my work car, I'd solder it but i don't know if i should get a specific solder or not, should i use more wire or try to solder the wire with whats alreayd therE? I'm just frustrated with the whole thing. Plus all my friends work the hours of the junk yards being open so that's unfortunatly not an option.

 

you should solder it, see if it works.

thats some funny ***** though, you had leaves and nuts inside your engine bay.

 

I have extra plugs. i will shipp it to you with 3 inches of wire to make sure you have enough. next day shipping is available.

 

Funny as hell, the rat is right there, sure its not a squirel?

 

wow.. haven't see you post in a while...

If you need some help, lemme know.. i get off at 4pm today and have a soldering iron if ya need it...

give me a buzz, you got my # bro.

 

Wow, im surprised you got a pic of the rat, thats hilarious. I know theyre out living in my old del Sol shell, but ive never seen em except for once when driving my old pos T-bird: one was just sitting on the passenger side floormat staring at me watching me drive. then when i saw him and slammed on the brakes and tried to smash him he was way too quick for me and ran up into the heater core. then i was nervous cuz i was afraid he would run up my pants while i was driving. Sorry im no help on your issue though. If you need a quick fix just twist em together and cover it good with electrical tape, should be OK for awhile.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solerizr &raquo;</TD></TR><TR><TD CLASS="quote"> one was just sitting on the passenger side floormat staring at me watching me drive. then when i saw him and slammed on the brakes and tried to smash him he was way too quick for me and ran up into the heater core. then i was nervous cuz i was afraid he would run up my pants while i was driving.</TD></TR></TABLE>

lol that is so funny..and the rat posing for the picture

 

did the rat get away?

Like everyone is sayin' you just need the injector clip. Go to a junk yard, and cut one off and put it in your pocket and walk out. They make soooo much money off of junked cars it's rediculous.