hi all ,

I was getting my tps code from few a days back, so today i checked it, i foud it lose,

i set it at .47 volts at close throttle, but at full throttler its not going above 3.90 to 4 volts,

I just want to ask, is it ok or i should have to go above 4.5 volts at WOT,

 

i think its 5 at WOT and .5 at idle

 

ok at idle the throttle is 10% open, .5v is what you should have.

at WOT the throttle is 90% open and it should be 4.5v.

Reference voltage is 5 volts.

 

I think i should set it at .5 at least for the low throttle

 

ur correct.

 

i checked the TPS.
I took it out, it was giving .20 volts at close condition when i rotate it completely it give 4.88,

but when install it back and set it at .45 vlts , on WOT ist giing 4 v,

 

Like I said before it needs .5v at idle and 4.5 at wot. alldata says so. and its what i've seen on most other tps.

 

mine got broken in installation, in 2 pices, i think the reson behind it must be this,