I have a turbo charged b16a in a 95 civic hatch. I am making 345whp/230tq. I am wondering what size slicks I should use. I dont know if I should be using 23 or 24.5 in tall slicks. Your help is appreciated.

Thanks

 

pm slicksmh, thats john from m and h and he will be able to tell you. i would think that 23's should do you, but 24.5's may not be detremental either.

 

thanks man!

 

**** im running 25's all motor

 

i say 24.5 will be ideal for you, thats wat im going to be running

 

will running a 22x8x13 be ok for the time being. How much difference would I see using a larger slick. Thanks for your help guys.

 

i experienced a 320whp b16 with 24.5s and ended the quarter just shifting into 4th which was 109 mph. 23" would be better from my experience. 24.5s made the gear ratio too long.

 

i have 360 whp, i had 22's and just spun them until 4th gear, get the 24.5's.

just get mh no matter what

 

why would you say that after reading my post? or did u read my post

 

24.5's with my b16 tranny were a perfect fit, i was taking it to 8500rpm, and going through the trap in fourth gear at about 8350.
thats why i said taht

 

i dont know maybe the extra 40-50 whp made that difference with your run. i didnt think it would make that much of a difference

 

i dont know man, maybe it did, i wouldnt think so