FS: COMPLETE SOHC Greddy Turbo Kit bolt-and-go
Thread Starter
Risky Business
Joined: Jul 2002
Posts: 25,229
Likes: 47
From: Trackside with the smoking bee
FS: COMPLETE SOHC Greddy Turbo Kit bolt-and-go
***eBay'ed. $800 + shipping, no reserve***
http://cgi.ebay.com/ebaymotors...%3AIT
This is the turbo kit from my old mini-me powered 4 door. I never dynoed the setup, but it went 15.1@94 at the drag strip on 6 psi (I suck at launching). This kit comes with just about everything you need (minus spark plugs) to bolt onto a D16Z6 (or other SOHC - the ECU is tuned for a Z6 though) and start boosting. The turbo is internally gated at 6psi, but you can easily raise that with a boost controller.
Asking Price: $1000.00 obo
What all comes with it:
-GReddy TD04H-15g Turbo Internally Gated at 6 psi
-GReddy Cast Iron Manifold
-GReddy Down Pipe
-4 Wire 02 Sensor
-Stainless feed line with T fitting to mount oil pressure sender on firewall
-Stainless return line with AN-10 fittings
-Tapped oil pan for return line (oil pan will not fit Y7s or Y8's)
-JohnnyRaceCar.com 5" FMIC w/ mounting hardware (painted black)
-JCWhitney Charge Pipes
-Home Depot Hose Couplers
-Silicone hose coupler (for turbo outlet)
-Vacuum lines for wastegate (I used the FPR) and BOV (brake booster)
-eBay Chrome BOV
-DSM 450cc Injectors w/ Resistor Box and Seals
-Sunpro boost gauge (I never mounted this in my car)
-Chipped P28 ECU w/ Uberdata by John Kerr (93turbo16) This map ran perfectly with my B7/Z6 mini me for almost 2 years (about 40,000 miles). The map was for his own car which was a Greddy Kit on a Z6.
Other pictures:
(I can get pictures of anything you want to see).
http://cgi.ebay.com/ebaymotors...%3AIT
This is the turbo kit from my old mini-me powered 4 door. I never dynoed the setup, but it went 15.1@94 at the drag strip on 6 psi (I suck at launching). This kit comes with just about everything you need (minus spark plugs) to bolt onto a D16Z6 (or other SOHC - the ECU is tuned for a Z6 though) and start boosting. The turbo is internally gated at 6psi, but you can easily raise that with a boost controller.
Asking Price: $1000.00 obo
What all comes with it:
-GReddy TD04H-15g Turbo Internally Gated at 6 psi
-GReddy Cast Iron Manifold
-GReddy Down Pipe
-4 Wire 02 Sensor
-Stainless feed line with T fitting to mount oil pressure sender on firewall
-Stainless return line with AN-10 fittings
-Tapped oil pan for return line (oil pan will not fit Y7s or Y8's)
-JohnnyRaceCar.com 5" FMIC w/ mounting hardware (painted black)
-JCWhitney Charge Pipes
-Home Depot Hose Couplers
-Silicone hose coupler (for turbo outlet)
-Vacuum lines for wastegate (I used the FPR) and BOV (brake booster)
-eBay Chrome BOV
-DSM 450cc Injectors w/ Resistor Box and Seals
-Sunpro boost gauge (I never mounted this in my car)
-Chipped P28 ECU w/ Uberdata by John Kerr (93turbo16) This map ran perfectly with my B7/Z6 mini me for almost 2 years (about 40,000 miles). The map was for his own car which was a Greddy Kit on a Z6.
Other pictures:
(I can get pictures of anything you want to see).
Honda-Tech Member
Joined: May 2002
Posts: 6,284
Likes: 0
From: www.deviantpixels.com
Re: FS: COMPLETE SOHC Greddy Turbo Kit bolt-and-go (JJ-Built)
This would be great for you sohc's out there that get to the light and look over and say, "You know what Dave, I'm gonna race em!!!"
Nice put together. Great seller as if I have to say that
Nice put together. Great seller as if I have to say that
Trending Topics
Thread Starter
Risky Business
Joined: Jul 2002
Posts: 25,229
Likes: 47
From: Trackside with the smoking bee
Re: FS: COMPLETE SOHC Greddy Turbo Kit bolt-and-go (BauleyCivic)
eBay'ed. $800 + shipping, no reserve
http://cgi.ebay.com/ebaymotors...%3AIT
http://cgi.ebay.com/ebaymotors...%3AIT
Thread
Thread Starter
Forum
Replies
Last Post
MugenNSX
Southern California (Sales)
3
Nov 22, 2008 09:59 AM
BauleyCivic
Classifieds: Forced Induction
7
Sep 1, 2006 05:06 AM
BauleyCivic
Northeast (Sales)
1
Aug 31, 2006 04:39 PM
