I'm posting what I have for my auto-manual swap for 2 reasons:
1. If I forget soemthing ppl can tell me
2. So in the future ppl can use this page to help themselves.

Heres my car, '97 GS DC4

Heres the doner '97 GSR DC2

...and heres why its a doner


Heres the parts i've collected so far, dont have pics of them all, but i'll post what I can

Shift linkage / shift **** / boot / console piece

Intermediate shaft

GSR wiring harness

Mounts from GSR, Also have the Hasport conversion mount coming in the mail. Not sure which mounts I need, so I took em all

Manual Starter

Slave cylinder, Master Cyliner, and hard and soft clutch lines, and clutch fluis resivour

Clutch pedal assembly and brake pedal

GSR cluster (Does anyone know if I can use my auto cluster with the tape form this one? I like the black better...)

P72 virgin ECU Obd2a
(no pic, but I swear it looks like and ecu)

The motor and trans will be out of the shop soon, and I'll post pics of thoes.

Not needed for the swap, but I got anyway were a used Icebox and a set of DC Sports headers


I know Im forgeting stuff and I'll add stuff as I remeber it, or as people tell me

Once the list is done, I hope it'll help myself and other people when collecting all these parts

 

flywheel....flywheel cover...

there is a auto to manual thread in the faq dude


dont forget the johnson rod

 

also, check out this link
https://honda-tech.com/zerothread?id=273253

 

Usually you can use the film but since they are different...dc2 vs dc4 i dont think you can

 

hey i need some doner parts. can u hook me up with the seats?

if ur in cali, i can pick them up and toss u a few bills.

if not, can u ship me just the seat covers? all u have to do is unzip and remove the cover.

i'll give you like 100 for front and rear seat covers if they are in good condition.

 

Dont forget the front tranny mount..it uses 3 bolts instead of 2 on the auto.

You also dont need the whole engine harness....i just used the auto one and had some left over plugs.