i was wondering, do the catch pan for the tranny and motor have to be seperate? or can it be one whole piece? thank you

 

also, is there any sfi regulation in nhra? i dont see it in the rule book, or can it be just some sort of a fabbed up peice of sheet metal with walls on it

 

i see a lot of guys running fabbed up catch pans that they made themself..so im sure that there isnt any sfi regulation...and it can also be one piece...doesnt have to be two separate pans

 

awesome, this is new for this year, right?

 

It is a one piece of sheet metal that has to have 1" walls that can collect fluids from the trans/motor. This is not a replacement for the scattershield though (some people think it is), you still need to have that. There are a few people that have one on here:

Miller Not sure of the vehicle they have done it on
JPenman (Jasen Penman) EG
Akuma Y (Hoa) EG
TylerH (Tyler) EK

They have all done them.

Jason

 

ok so nothing special, just some sheet metal with some lips on it. thank you jason

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pro-Am 1934 &raquo;</TD></TR><TR><TD CLASS="quote">It is a one piece of sheet metal that has to have 1" walls that can collect fluids from the trans/motor. This is not a replacement for the scattershield though (some people think it is), you still need to have that. There are a few people that have one on here:

Miller Not sure of the vehicle they have done it on
JPenman (Jasen Penman) EG
Akuma Y (Hoa) EG
TylerH (Tyler) EK

They have all done them.

Jason</TD></TR></TABLE>

I made one also for my EG. It looks similiar to NRG but bigger.
Joe Simpson makes them and sells them at the races.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Pro-Am 1934 &raquo;</TD></TR><TR><TD CLASS="quote">It is a one piece of sheet metal that has to have 1" walls that can collect fluids from the trans/motor. This is not a replacement for the scattershield though (some people think it is), you still need to have that. There are a few people that have one on here:
Jason</TD></TR></TABLE>

mine are 2 separate pans and have passed NHRA SFWD twice. we will see about NOPI next weekend. :crosses fingers:

 

nothing exciting...works great..pass's tech....easy to take on and off...and we sell them cheap. we have saved a bunch of racers by actually having spares with us AT the events

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged &raquo;</TD></TR><TR><TD CLASS="quote">we have saved a bunch of racers by actually having spares with us AT the events </TD></TR></TABLE>

 

does anyone have pictures of how these are mounted?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boostedcivicsir &raquo;</TD></TR><TR><TD CLASS="quote">

mine are 2 separate pans and have passed NHRA SFWD twice. we will see about NOPI next weekend. :crosses fingers:</TD></TR></TABLE>

At NOPI you do not need the pan unless your going 9.59 or faster
just to calm your nerves

 

ok dad......im more worried about not grenading the engine on joe's dyno he hee.

 

haha that was funny, your dynoing at Joes?

 

hope so, taking a half day and leaving for his shop at like 1ish, should put me there 3:30-4:00i hope.

 

damm im taking a ha;f day to leaving around the same time, but hope to get there at like 6-7
good luck and see you down there

 

nothing exciting...works great..pass's tech....easy to take on and off...and we sell them cheap. we have saved a bunch of racers by actually having spares with us AT the events [/QUOTE]

how much???

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbo-charged &raquo;</TD></TR><TR><TD CLASS="quote">


</TD></TR></TABLE>
i got one of these from joe and it fit great. pretty hard to find something that fits my car without mods.

 

Turbo-Charged,
Where do we get one of these if needed.

platinum.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by platinum00 &raquo;</TD></TR><TR><TD CLASS="quote">Turbo-Charged,
Where do we get one of these if needed.

platinum.</TD></TR></TABLE>

from him...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo &raquo;</TD></TR><TR><TD CLASS="quote">from him... </TD></TR></TABLE>

yeah pm joe he is a cool cat.

 

https://honda-tech.com/zerothread?id=1664360

 

thanks guys, joe is the man

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miamidamian &raquo;</TD></TR><TR><TD CLASS="quote">
https://honda-tech.com/zerothread?id=1664360</TD></TR></TABLE>


that's a bit much I think. i guess if you did not have the tools to make one then it's a ok price.

 

what thickness of aluminum sheet metal is everyone using?