well just like the topic states i need a roll cage done in my 93 civic si to be allowed for nhra rules for 9sec timeslips. dont know the exact specifications or the regulations but any advice would be helpful! also if someone knows of any shops that do installs of these roll cages please let me know.

Andre

 

needs to be a 10 point with CORRECT "D" BARS he hee. had to go there.

 

Steen chassis, Pro mod, Pat Lierley, Rage, L con, Redzone fab, Rob Miller any of these names should be able to help you out.


Modified by Six Sigma Racing at 5:18 PM 8/16/2006

 

Unique Fabrications Irvine,CA

*Ill get the address and phone# in a sec*

 

We had Steen Chassis do my cage, excelent work... There are other reputable chassis builders out there also...

Mike...

 

what about S&W 10pt would that pass tech for a 9 sec time slip?

 

ProMod 323-564-2213 Owner DANNY

Fab-tech (818) 998-1262 Owner JOHN

tell them tom from camp1320 sent you

promod is bang for the buck and you get more than what you pay for.

fab-tech is pricey $$$$ but really really good, cheaper then STEEN but either the same or better.

 

http://steenchassis.com/

they did a few cars u should recognize....

jojo's profwd
leslie's crx & scion
bergenholtz's cars
AEM's drift cars
and a bunch others i cant think of...

heres my cage they did, 10pt, removable door bars

 

L-con Racecar fabrication and engineering
Placentia, CA

714-572-4130

http://www.l-con.net for works samples

Steen is very good as well, however I believe they only built the all motor car. The PRO FWD was done by bullet fab

I also heard a rumor pro mod is no longer in business?

 

called pro mod and the number was either disconnected or changed!

 

Pauly's Race Cars -

Rob Miller -

From a street to a 7.30's PFWD these 2 guys are off the chain. Here's a link to the car they did for me--

https://honda-tech.com/zerothread?id=1722964

Jason@RageImports.com ill get you all the info

 

562-228-9561 sorry this is there new number PROMOD. DANNY

opphs forgot about L-CON owner louie and the number is onthe above post.

 

Steen Chassis does great work they have done alot of work for me. Great people and do what they say. They get the tubes closer to the headliner and pillars then anyone else Ive used. Talk to Gary or Jason (562)989-1616 they are in signal hill(long beach)

 

Thanks Tom just contacted Danny@ Promod gave me a choice of cheaper and less expensive or more expensive and lighter so im going with the more expensive for the less wight. I do got 1 ques. though, are wheelie bars allowed in street class for nhra?

 

no they are not allowed

danny does good work he did 3 of our sfwd cars!!!!! and he has done gohstworks car also!!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rip94delsol &raquo;</TD></TR><TR><TD CLASS="quote">Thanks Tom just contacted Danny@ Promod gave me a choice of cheaper and less expensive or more expensive and lighter so im going with the more expensive for the less wight. I do got 1 ques. though, are wheelie bars allowed in street class for nhra?</TD></TR></TABLE>

Tom always helps people out..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rip94delsol &raquo;</TD></TR><TR><TD CLASS="quote">Thanks Tom just contacted Danny@ Promod gave me a choice of cheaper and less expensive or more expensive and lighter so im going with the more expensive for the less wight. I do got 1 ques. though, are wheelie bars allowed in street class for nhra?</TD></TR></TABLE>
danny is a very cool guy

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ekasey &raquo;</TD></TR><TR><TD CLASS="quote">

I also heard a rumor pro mod is no longer in business?</TD></TR></TABLE>
yea he had got allot people low balling him and was thinking of not doing cages anymore but he came back

 

Unique Fabrication
6 McLaren, Suite L
Irvine, CA 92618
949-305-9305
Email: sales@uniquefabrication.com

http://www.uniquefabrication.com/

Cage in C5 Corvette


Cage in Skyline



Cage in Integra

 

well didnt expect to get so many reviews. thank you all for your help does any body have pictures of promods work?

 

Unique Fabrication - kinda swamped right now, but without a doubt best work around. Here's a more completed photo of my cage.

 

danny @ promod did my cage also....good work cheap!

 

I don't have any pictures but if you want to see the work come down to IDRC palmdale, you'll have no problem finding a promod cage. Extremely clean welding.

 

well i will be there without a doubt. it really bums me out though to see other cars out and not mine. its kool good things come for people who wait!

 

here is a car that danny did GHOSTWORKS car
https://honda-tech.com/zero...age=1