GSR Cam Caps
you are going to have to find a used set in the classifieds or such
btw: your going to have to send the head and cam caps out to the machine shop to get line-honed. the reason is no two cam journals are exactly the same and are individually honed from honda. without re-honing the caps/head you run a high risk of seizing the cams
the good news is its a simpple procedure and machine shops dont charge much at all..you will though have to remove the head
btw: your going to have to send the head and cam caps out to the machine shop to get line-honed. the reason is no two cam journals are exactly the same and are individually honed from honda. without re-honing the caps/head you run a high risk of seizing the cams
the good news is its a simpple procedure and machine shops dont charge much at all..you will though have to remove the head
so I can't buy them from honda then? and yeah i knew about the honing. And the whole motor is disassembled. I am only missing one cap because I had the motor at a friends house and it got stolen. To make a long story short, I found out who it was beat their asses and took my motor back. God damn low lifes
Thread
Thread Starter
Forum
Replies
Last Post
freeagent32
All Motor / Naturally Aspirated
12
Jul 13, 2005 03:55 PM
tvrsir
All Motor / Naturally Aspirated
17
Jul 9, 2004 07:30 AM




