I'm going to be retro fitting a TSX projector in my 98 integra soon, and I was wondering how high is the cut off line supposed to be? For Instance there's a picture in this site http://www.skafia.com/itr/hid/. it's about two feet off the ground, but the question is how far is he away from the wall. I just want to know that so I can aim it properly. Any help is great. Thanks


Modified by B20inDCinLBC at 5:52 PM 8/5/2006

 

^^

 

FYI -> Bad Link...might wanna fix that

 

http://www.danielsternlighting....html

The TSX projectors are DOT.

 

good article...nice find

 

good find!!

 

is that TSX marked VOL, VO or VOR?

 

before you cut the metal cone, you can measure it. But if you can make the len more outer, the effect is better.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B20inDCinLBC &raquo;</TD></TR><TR><TD CLASS="quote">I'm going to be retro fitting a TSX projector in my 98 integra soon, and I was wondering how high is the cut off line supposed to be? For Instance there's a picture in this site http://www.skafia.com/itr/hid/. it's about two feet off the ground, but the question is how far is he away from the wall. I just want to know that so I can aim it properly. Any help is great. Thanks


Modified by B20inDCinLBC at 5:52 PM 8/5/2006</TD></TR></TABLE>