TESTING WATERS trade wanted: 1998 Milano Red Honda Civic EX Coupe Built SOHC TURBO 300whp
i will trade for almost anything as long as it includes cash and is reliable. will trade straight up for a stock car of equal value ie newer teg civic si newer prelude...make an offer
Well im looking to get out of debt so i am gonna try and sell/trade (plus cash of course) my car .all trades must run well. I want a STOCK motor bolt ons at most. Must have AC,and clean interior. I would prefer a BLACK or WHITE DC integra paint can be bad but not too bad, it will get an ITR front and new paint but i dont want to pay for much body work. I will also consider trades for an eg or possibly an EK hatch.
Started putting together a list today and so far I have come up with 7k in parts i have in this car. obviously i know i wont get back much of that money but it is worth mentioning
Now heres what i have:
1998 Honda Civic EX Milano Red 88k on chassis
Motor:
Block <5k great oil pressure great compression 185 across
d16z6 75.5mm bore (nothing was wrong with block before rebuild)
wiseco 9:1 pistons (appx 8.8 with y8 head)
eagle h-beams
new oil pump
new water pump
new timing belt
fresh gaskets on whole bottom end
Head
Stock Y8 ~88k
hondata intake gasket
arp headstuds
D16y8 tranny ~88k
proclutch stage 3 clutch (rated at 300ft-lbs tq)
clutchmasters 7lb flywheel
Turbo
Precision sc50 .63ar
Silly Sohc Ramhorn AC compatible manifold
Silly Sohc 3" AC compatible downpipe modified to run a e-cutout
DMH 3" ecutout
Black 38mm Tial Wastegate with 0.6bar Spring
Black Tial 50mm BOV
2.5" intercooler piping painted black
Johnny Racecar 6" Intercooler
Turboxs dual stage boost controller
680cc Injectors
walbro pump
Chipped p28 tuned on Crome (waiting on neptune)
-recently turboed less than 1000 miles ago running on wastegate making sure everything is running well (so far so good) before turning up the boost for 300-400whp
Omnipower coilovers
15" Buddy Club P1 racing wheels x 5
falken Azenis Tires x 4 plenty of tread
SI wing
99-00 taillights
diy gunmetal headlights
diy si grille
Interior is stock
deficiencies: small rip in driver seat where bolster meets the middle
few small dings
one fist sized dent in passenger rear quarter...hard to notice
few paint chips
No AC although i have most of the parts..only lacking a few lines and the idler pully(it was squeaking)
This is all i have for pictures i can take more as things get a little more serious. I havent taken any pics of the turbo installed yet but i will soon!

























Oh and thanks for listening to me ramble on and on please bump if you make it this far lol
Modified by dornon13 at 9:33 PM 7/25/2006
Modified by dornon13 at 9:34 PM 7/25/2006
Modified by dornon13 at 9:35 PM 7/25/2006
Modified by dornon13 at 3:19 AM 7/27/2006
Modified by dornon13 at 1:36 AM 8/23/2006
Modified by dornon13 at 2:25 AM 9/20/2006
Modified by dornon13 at 5:50 AM 9/24/2006
Modified by dornon13 at 4:09 PM 10/21/2006
Well im looking to get out of debt so i am gonna try and sell/trade (plus cash of course) my car .all trades must run well. I want a STOCK motor bolt ons at most. Must have AC,and clean interior. I would prefer a BLACK or WHITE DC integra paint can be bad but not too bad, it will get an ITR front and new paint but i dont want to pay for much body work. I will also consider trades for an eg or possibly an EK hatch.
Started putting together a list today and so far I have come up with 7k in parts i have in this car. obviously i know i wont get back much of that money but it is worth mentioning
Now heres what i have:
1998 Honda Civic EX Milano Red 88k on chassis
Motor:
Block <5k great oil pressure great compression 185 across
d16z6 75.5mm bore (nothing was wrong with block before rebuild)
wiseco 9:1 pistons (appx 8.8 with y8 head)
eagle h-beams
new oil pump
new water pump
new timing belt
fresh gaskets on whole bottom end
Head
Stock Y8 ~88k
hondata intake gasket
arp headstuds
D16y8 tranny ~88k
proclutch stage 3 clutch (rated at 300ft-lbs tq)
clutchmasters 7lb flywheel
Turbo
Precision sc50 .63ar
Silly Sohc Ramhorn AC compatible manifold
Silly Sohc 3" AC compatible downpipe modified to run a e-cutout
DMH 3" ecutout
Black 38mm Tial Wastegate with 0.6bar Spring
Black Tial 50mm BOV
2.5" intercooler piping painted black
Johnny Racecar 6" Intercooler
Turboxs dual stage boost controller
680cc Injectors
walbro pump
Chipped p28 tuned on Crome (waiting on neptune)
-recently turboed less than 1000 miles ago running on wastegate making sure everything is running well (so far so good) before turning up the boost for 300-400whp
Omnipower coilovers
15" Buddy Club P1 racing wheels x 5
falken Azenis Tires x 4 plenty of tread
SI wing
99-00 taillights
diy gunmetal headlights
diy si grille
Interior is stock
deficiencies: small rip in driver seat where bolster meets the middle
few small dings
one fist sized dent in passenger rear quarter...hard to notice
few paint chips
No AC although i have most of the parts..only lacking a few lines and the idler pully(it was squeaking)
This is all i have for pictures i can take more as things get a little more serious. I havent taken any pics of the turbo installed yet but i will soon!

























Oh and thanks for listening to me ramble on and on please bump if you make it this far lol
Modified by dornon13 at 9:33 PM 7/25/2006
Modified by dornon13 at 9:34 PM 7/25/2006
Modified by dornon13 at 9:35 PM 7/25/2006
Modified by dornon13 at 3:19 AM 7/27/2006
Modified by dornon13 at 1:36 AM 8/23/2006
Modified by dornon13 at 2:25 AM 9/20/2006
Modified by dornon13 at 5:50 AM 9/24/2006
Modified by dornon13 at 4:09 PM 10/21/2006
Trending Topics
thanks todd i need to pick up that boost controller from you so this thing will MOVE
I would have to see it in person first, but I would be willing to trade my 96 lude si if you are interested.
http://hondamarketplace.com/zerothread?id=1715560
http://hondamarketplace.com/zerothread?id=1715560


