FS: 93 Civic Si Shell
For pics PM or post your e-mail addy
1993 Civic Si hatchback with a welded (done right) 2000 Civic front end. The car is all primer gray right now all you need to do is sand down re-prime and paint and then you are ready to go. Should need very little if any body work. The engine bay is already sprayed a medium gloss black and clear coated. Interior from the carpet forwad is intact but there is no rear interior. The car will come on steelies and headlights are going to be for sale seperatly. The entire dash harness has been replaced and only the cluster connections and the passenger door wiring is modified. If you have any other questions send me an e-mail or IM me on AIM or something.
Here is a list of what will come with the shell...
- Autopower 4pt. Cage (blue in color)
- SS brake lines
- Cobalt front and Hawk rear pads
- Integra cloth seats
- Walbro fuel pump
- 2000 civic front end (previously mentioned)
- Carbon Fiber hood (not the best shape) I have a brand new replacement that I am selling if you want to pay a little more.
- Hood Pins
- New windsheild
- Ground Control coil overs (stock spring rate)
- Stock shocks
- Moroso battery relocation kit
- EK fully functional guage cluster
- Lower rear tie bar
- OEM Si front lip
- New OEM front bumper
Looking for $1,600 as it sits
All of my spare parts and turbo parts will be listed in a seperate thread that I will post after i get everything taken apart or mostly apart.
Modified by ralphie14 at 9:59 PM 7/25/2006
Modified by ralphie14 at 7:42 AM 10/12/2006
1993 Civic Si hatchback with a welded (done right) 2000 Civic front end. The car is all primer gray right now all you need to do is sand down re-prime and paint and then you are ready to go. Should need very little if any body work. The engine bay is already sprayed a medium gloss black and clear coated. Interior from the carpet forwad is intact but there is no rear interior. The car will come on steelies and headlights are going to be for sale seperatly. The entire dash harness has been replaced and only the cluster connections and the passenger door wiring is modified. If you have any other questions send me an e-mail or IM me on AIM or something.
Here is a list of what will come with the shell...
- Autopower 4pt. Cage (blue in color)
- SS brake lines
- Cobalt front and Hawk rear pads
- Integra cloth seats
- Walbro fuel pump
- 2000 civic front end (previously mentioned)
- Carbon Fiber hood (not the best shape) I have a brand new replacement that I am selling if you want to pay a little more.
- Hood Pins
- New windsheild
- Ground Control coil overs (stock spring rate)
- Stock shocks
- Moroso battery relocation kit
- EK fully functional guage cluster
- Lower rear tie bar
- OEM Si front lip
- New OEM front bumper
Looking for $1,600 as it sits
All of my spare parts and turbo parts will be listed in a seperate thread that I will post after i get everything taken apart or mostly apart.
Modified by ralphie14 at 9:59 PM 7/25/2006
Modified by ralphie14 at 7:42 AM 10/12/2006
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 97_hatch »</TD></TR><TR><TD CLASS="quote">Pictures please
</TD></TR></TABLE>
PM your e-mail.
</TD></TR></TABLE>PM your e-mail.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91backinblack »</TD></TR><TR><TD CLASS="quote">Great project for the price! Bump!</TD></TR></TABLE>
Thanks
Thanks
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ralphie14 »</TD></TR><TR><TD CLASS="quote">Bump
</TD></TR></TABLE>
</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ralphie14 »</TD></TR><TR><TD CLASS="quote">For pics PM or post your e-mail addy
1993 Civic Si hatchback with a welded (done right) 2000 Civic front end. The car is all primer gray right now all you need to do is sand down re-prime and paint and then you are ready to go. Should need very little if any body work. The engine bay is already sprayed a medium gloss black and clear coated. Interior from the carpet forwad is intact but there is no rear interior. The car will come one steelies and headlights are going to be for sale seperatly. The entire dash harness has been replaced and only the cluster connections and the passenger door wiring is modified. If you have any other questions send me an e-mail or IM me on AIM or something.
Here is a list of what will come with the shell...
- Autopower 4pt. Cage (blue in color)
- SS brake lines
- Cobalt front and Hawk rear pads
- Integra cloth seats
- Walbro fuel pump
- 2000 civic front end (previously mentioned)
- Carbon Fiber hood (not the best shape) I have a brand new replacement that I am selling if you want to pay a little more.
- Hood Pins
- New windsheild
- Ground Control coil overs (stock spring rate)
- Stock shocks
- Moroso battery relocation kit
- EK fully functional guage cluster
- Lower rear tie bar
- OEM Si front lip
- New OEM front bumper
Looking for $1,600 as it sits
All of my spare parts and turbo parts will be listed in a seperate thread that I will post after i get everything taken apart or mostly apart.
Modified by ralphie14 at 9:59 PM 7/25/2006</TD></TR></TABLE>
Too bad about the front end, otherwise I would have been all over this for $1,600
1993 Civic Si hatchback with a welded (done right) 2000 Civic front end. The car is all primer gray right now all you need to do is sand down re-prime and paint and then you are ready to go. Should need very little if any body work. The engine bay is already sprayed a medium gloss black and clear coated. Interior from the carpet forwad is intact but there is no rear interior. The car will come one steelies and headlights are going to be for sale seperatly. The entire dash harness has been replaced and only the cluster connections and the passenger door wiring is modified. If you have any other questions send me an e-mail or IM me on AIM or something.
Here is a list of what will come with the shell...
- Autopower 4pt. Cage (blue in color)
- SS brake lines
- Cobalt front and Hawk rear pads
- Integra cloth seats
- Walbro fuel pump
- 2000 civic front end (previously mentioned)
- Carbon Fiber hood (not the best shape) I have a brand new replacement that I am selling if you want to pay a little more.
- Hood Pins
- New windsheild
- Ground Control coil overs (stock spring rate)
- Stock shocks
- Moroso battery relocation kit
- EK fully functional guage cluster
- Lower rear tie bar
- OEM Si front lip
- New OEM front bumper
Looking for $1,600 as it sits
All of my spare parts and turbo parts will be listed in a seperate thread that I will post after i get everything taken apart or mostly apart.
Modified by ralphie14 at 9:59 PM 7/25/2006</TD></TR></TABLE>
Too bad about the front end, otherwise I would have been all over this for $1,600
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by troppop »</TD></TR><TR><TD CLASS="quote">
Too bad about the front end, otherwise I would have been all over this for $1,600</TD></TR></TABLE>
Some people like it some people don't, thanks for the bump
Too bad about the front end, otherwise I would have been all over this for $1,600</TD></TR></TABLE>
Some people like it some people don't, thanks for the bump
Here are some pics... If you want to see the other 4 or 5 then PM me your e-mail addy.
http://img.photobucket.com/alb...4.jpg
http://img.photobucket.com/alb...3.jpg
http://img.photobucket.com/alb...2.jpg
http://img.photobucket.com/alb...1.jpg
http://img.photobucket.com/alb...4.jpg
http://img.photobucket.com/alb...3.jpg
http://img.photobucket.com/alb...2.jpg
http://img.photobucket.com/alb...1.jpg
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by LyghtFunky1 »</TD></TR><TR><TD CLASS="quote">wow, thats actually really neat looking, do you have a engine for it?</TD></TR></TABLE>
Not a spare no, the one that is in there now I am going to keep around.
Not a spare no, the one that is in there now I am going to keep around.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DELshow »</TD></TR><TR><TD CLASS="quote">where are you located???</TD></TR></TABLE>
Lincoln, NE
Lincoln, NE



