I've always been curious if an aftermarket upper control arm was made for the G2 integra's. I've never been able to find one.



Something like this. I'm aware of how to get the camber corrected on the car, because the picture above is to adjust the camber. Just wondering if anything like that unit is made for the G2 integra's.

TIA

 

vision makes one for our cars, but they are only negative camber adjustable.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG &raquo;</TD></TR><TR><TD CLASS="quote">vision makes one for our cars, but they are only negative camber adjustable.</TD></TR></TABLE>

Would I be able to use something like this to correct what you just stated?

http://www.modacar.com/product....html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Backk InTheDA &raquo;</TD></TR><TR><TD CLASS="quote">Would I be able to use something like this to correct what you just stated?

http://www.modacar.com/product....html</TD></TR></TABLE>

if your not to low then those are good, but im dropped about 3 inches and those balljoints took away alot of my UCA to shock tower clearance and the knock around alot. im going back to stock a soon as i can!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG &raquo;</TD></TR><TR><TD CLASS="quote">

if your not to low then those are good, but im dropped about 3 inches and those balljoints took away alot of my UCA to shock tower clearance and the knock around alot. im going back to stock a soon as i can!</TD></TR></TABLE>

Thanks for the help man, really appreciate it. But do you have website to where I can check out those vision control arms? I looked at the sponsors section, and was unsuccessful.

 

skunk2 doesnt make one for a da? thats odd

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BustedTeg &raquo;</TD></TR><TR><TD CLASS="quote">skunk2 doesnt make one for a da? thats odd</TD></TR></TABLE>

no.

OP:
you can go to jhpusa.com and check them out.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by projectTeG &raquo;</TD></TR><TR><TD CLASS="quote">

no.

OP:
you can go to jhpusa.com and check them out.</TD></TR></TABLE>

Thank you!

 

no one to my knowlege makes an adjustable upper control arm to correct camber on the DA. there simply isnt enough room. last i heard omniman was working on designing one but ran into clearance problems also. from what i hear the best we can get in our da's are to use spc adj ball joint and hammer the inner fender for clearance.

i myself am dropped well more than 3 inches and have given up on correcting my front camber.