FS: 96 GSR head, cams, lifters and springs; GSR AEM intake; Valve cover; main studs
Double posted over in the texas forum
In College station if anyone is local
I have a 96 GSR head, b18c1, for sale, it is in great condition, a little dirty on the exhaust side, and a little oily on top but it will clean right up. I am selling the complete head which includes: cams (with gear), springs and lifters (all stock) in great condition; clearly oil runs and Vtec solenoid included. Remember guys, deck your head when you mate it to a new block, I am not responsible if you break your block after attaching my head and in buying from me, you are agreeing to that.






You are also responsible for checking the valve clearances with your pistons and the free function of the valves themselves with the above terms.
Valve cover is in great condition, you will just need some honda gasket maker to seal it down.
Main studs as you see pictured with the camshafts are availible as well, bolts being bolts I don't guarantee anything about them but they look fine.
AEM intake was bought used off of EBAY with a few scratches but none on the top (visible) side, works great, sounds good comes with the filter, one AEM silicone sleeve and the main piping piece which is shiny Red. You will need a few ring clamps which you can get from walmart at 2am like I did because the ones I was given didn't fit, I am not including the ones I bought because I lost them but, they are like 2 dollars, so there you go. I am pretty sure that is the entire parts list for the intake, if not, that is all I have and again that is what you are agreeing to buy. AEM website claims this bad boy to be CARB legal. There is a bolt that is needed, I will have to check my bolt stash, if I find it, it will be included, if not, it is a dollar at your local ace.

Prices:
Whole head
( head, lifters, oil runs, springs, valves, camshafts with gears)- $450 Or Best Offer
Shipping is going to be pretty intense so factor that in.
Valve cover- $55 shipped to you in the contiguous america
Main studs- $15 Shipped
AEM- $100 shipped in the contiguous states
I will do pick up or international but prices will vary.
Vouches I don't have on the forum but I will give you a link to my EBAY account
Account name: Westnazaretheasycore
Feeback: 11 100%
http://feedback.ebay.com/ws/eB...=1883
Modified by I am ten ninjas at 11:56 PM 7/11/2006
Modified by I am ten ninjas at 8:30 PM 7/15/2006
Modified by I am ten ninjas at 8:36 PM 7/15/2006
Modified by I am ten ninjas at 1:33 PM 7/17/2006
In College station if anyone is local
I have a 96 GSR head, b18c1, for sale, it is in great condition, a little dirty on the exhaust side, and a little oily on top but it will clean right up. I am selling the complete head which includes: cams (with gear), springs and lifters (all stock) in great condition; clearly oil runs and Vtec solenoid included. Remember guys, deck your head when you mate it to a new block, I am not responsible if you break your block after attaching my head and in buying from me, you are agreeing to that.
You are also responsible for checking the valve clearances with your pistons and the free function of the valves themselves with the above terms.
Valve cover is in great condition, you will just need some honda gasket maker to seal it down.
Main studs as you see pictured with the camshafts are availible as well, bolts being bolts I don't guarantee anything about them but they look fine.
AEM intake was bought used off of EBAY with a few scratches but none on the top (visible) side, works great, sounds good comes with the filter, one AEM silicone sleeve and the main piping piece which is shiny Red. You will need a few ring clamps which you can get from walmart at 2am like I did because the ones I was given didn't fit, I am not including the ones I bought because I lost them but, they are like 2 dollars, so there you go. I am pretty sure that is the entire parts list for the intake, if not, that is all I have and again that is what you are agreeing to buy. AEM website claims this bad boy to be CARB legal. There is a bolt that is needed, I will have to check my bolt stash, if I find it, it will be included, if not, it is a dollar at your local ace.
Prices:
Whole head
( head, lifters, oil runs, springs, valves, camshafts with gears)- $450 Or Best Offer
Shipping is going to be pretty intense so factor that in.
Valve cover- $55 shipped to you in the contiguous america
Main studs- $15 Shipped
AEM- $100 shipped in the contiguous states
I will do pick up or international but prices will vary.
Vouches I don't have on the forum but I will give you a link to my EBAY account
Account name: Westnazaretheasycore
Feeback: 11 100%
http://feedback.ebay.com/ws/eB...=1883
Modified by I am ten ninjas at 11:56 PM 7/11/2006
Modified by I am ten ninjas at 8:30 PM 7/15/2006
Modified by I am ten ninjas at 8:36 PM 7/15/2006
Modified by I am ten ninjas at 1:33 PM 7/17/2006
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
I am ten ninjas
For Sale
12
Jul 19, 2006 07:54 PM




