Ok i tried searching but wasn't to sure on what to search under to find this out. Is there any differences in integra 3rd gen gauge clusters. Like jdm/usdm ect. Also is there a difference in the gauge clusters between years. Any info would be great or help to what to search under to help me find this information out.

 

So much to list and I dont feel like doing it, but I will give you this

LS 6800 redline
GSR 8k
ITR 8.5

 

I know they look different i guess i should of been a little more specific. Are they all interchangeable with just pluging them in and everything working. For example can i take a gauge cluster from a 95 and put it in my 99.

 

bump

 

yes you can

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4drlsintegra &raquo;</TD></TR><TR><TD CLASS="quote">yes you can</TD></TR></TABLE>

 

yes you can

 

so no rewiring needs to be done then if i want to put a jdm cluster in or a 94-97 gauge cluster in my 99.

 

nope, basiccly it is the same gauge except in km

 

and in jdm land, you get yellow needles ftw!
lol

 

Also gonna have to swap the green flim on the back. So U.S green film is on the jdm cluster. This is because of the 94-97, 98+. If you have any questions you can pm me about the swap when you get to it.

 

well guys there is a difference for the jdm itr clusters. u can switch the green film off a stock ls/ gsr cluster on the back or u can do this i swapped the gauges out of the jdm cluster and put everything back in the usdm ls cluster. couple of screws to do it. only thing else i had to do was change the gas and the seatbelt icon. very easy if you search maybe u find the thread i used for help. hope that helps. oh off topic here i am looking for a usdm type r gauge cluster i have 98 jdm one for sale or trade for a usdm itr.

thanks

 

This guy is correct there is a difference ^^^^!
But if you swap the green film behind you'll be OK...

 

do you still have to swap the green film for a jdm gsr gauge cluster also, or is it just for the type r one. Also how hard is to change out the green film. Thanks for the info so far everybody.

 

the jdm gsr my buddy had u can plug it right in i think, his lights didn't work. to swap the green film just take a screw driver and take all the lights out should pop off. i would just swap the film or gauges for the jdm gsr. either one is easy

 

So why didnt the lights work do you know.

 

mayb the bulbs r dead?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Integra99 &raquo;</TD></TR><TR><TD CLASS="quote">So why didnt the lights work do you know.</TD></TR></TABLE>

probly cause the wiring for the jdm cars are different, i would swap the film or the gauges for the gsr too just to be safe