I have a integra gsr ECU in my 98 civic with 99b16a2 motor and my check engine light has been on for over a year and now they wont pass my car for emissions until i get the proper ECU...how do i do that? is there a wire harness? please help?

 

get a jumper harness from obd-2a to obd-2b and get the 99 si ecu p2t i believe it is

 

You need a 99-00 Si ECU and an OBD2a-OBD2b jumper harness so you can plug that ECU (OBD2b) into your 98 Civic (OBD2a).

 

where do i get this jumper harness??

 

only one I could find

http://cgi.ebay.com/ebaymotors...QrdZ1

 

just get a p72 from a GSR or p73 from a ITR

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spuddo01 &raquo;</TD></TR><TR><TD CLASS="quote">just get a p72 from a GSR or p73 from a ITR</TD></TR></TABLE>

What do people do - just hit reply after reading the thread title and skip the actual post??

The first 6 words of his post:

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by angelo1683 &raquo;</TD></TR><TR><TD CLASS="quote">I have a integra gsr ECU...</TD></TR></TABLE>

 

+ he's trying to pass inspection

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EE_Chris &raquo;</TD></TR><TR><TD CLASS="quote">You need a 99-00 Si ECU and an OBD2a-OBD2b jumper harness so you can plug that ECU (OBD2b) into your 98 Civic (OBD2a).</TD></TR></TABLE>
X2

ObdII What a headache.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by angelo1683 &raquo;</TD></TR><TR><TD CLASS="quote">I have a integra gsr ECU in my 98 civic with 99b16a2 motor and my check engine light has been on for over a year and now they wont pass my car for emissions until i get the proper ECU...how do i do that? is there a wire harness? please help?</TD></TR></TABLE>

what code are you running. did you even check. it shouldnt matter if your using a GSR ecu.

 

kenji211.com
$85
is the car runing well with that gsr ecu
if it is just run the obd2a-obd2b jumper hardness

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spuddo01 &raquo;</TD></TR><TR><TD CLASS="quote">

what code are you running. did you even check. it shouldnt matter if your using a GSR ecu. </TD></TR></TABLE>


from what I read in someones quote, "stop now while your only slightly behind"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sicones &raquo;</TD></TR><TR><TD CLASS="quote">


from what I read in someones quote, "stop now while your only slightly behind"</TD></TR></TABLE>
???????????????