WTB: 92-95 Civic EX Floor and Cabin Wiring Harness', located in Seattle...
I'm finishing up my project, (92 Civic Si) and need the complete floor and cabin harness' from a 92-95 Civic ""EX,"" since I now have complete EX doors internals. The floor harness is the the one that connects to the fuse box area and driver's side door. It reaches all the way back to the fuel pump and then connects to the other half of the rear wiring harness. I don't need the rear part of the harness which connects the rear lights, etc. The cabin I also need the complete cabin harness that connects the fuse box to the passenger door and runs into the engine bay.
The sooner I can get my hands on these the better. Please NO cut harness'.
Thanks!
The sooner I can get my hands on these the better. Please NO cut harness'.
Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MR.RED’89 »</TD></TR><TR><TD CLASS="quote">I have the floor side harness uncut</TD></TR></TABLE>
pm'd you.
pm'd you.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mixxxwell »</TD></TR><TR><TD CLASS="quote">i havewhat u need</TD></TR></TABLE>
What's the deal with them?
What's the deal with them?
Trending Topics
I know that I can use just a pieces of these harness', but I'm needing the whole thing regardless.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dxcoupe. »</TD></TR><TR><TD CLASS="quote">the floor harness is the same.</TD></TR></TABLE>
Not completely... The plugs that connect to the doors are different on the EX than on the DX and other coupe/hatch models.
Not completely... The plugs that connect to the doors are different on the EX than on the DX and other coupe/hatch models.
Thread
Thread Starter
Forum
Replies
Last Post




