B18cJDMGSR SCAMMMER
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
B18cJDMGSR SCAMMMER
sent this clown 360 i belive for a GSR bare block.... thinking.. oh it will come with main caps...... nope. the block gets here minus the 3 center caps.. it came with the 2 outer caps.. i pm him about it....the kid beats around.... lazy on getting back to me... lazy on finding new main caps... the idiot ******* sends me LS main caps for a GSR BLOCK.... YOU MORON, i wasnt born yesterday......... leaving this block useless to me....... unless you want to refund half of the money for the block... cause that is what its going to cost for an alighn hone/bore...
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: B18cJDMGSR SCAMMMER (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote"> sent this clown 360 i belive for a GSR bare block.... thinking.. oh it will come with main caps...... nope. the block gets here minus the 3 center caps.. it came with the 2 outer caps.. i pm him about it....the kid beats around.... lazy on getting back to me... lazy on finding new main caps... the idiot ******* sends me LS main caps for a GSR BLOCK.... YOU MORON, i wasnt born yesterday......... leaving this block useless to me....... unless you want to refund half of the money for the block... cause that is what its going to cost for an alighn hone/bore...
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech </TD></TR></TABLE>
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech
</TD></TR></TABLE>
Trending Topics
) were the same
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: B18cJDMGSR SCAMMMER (dturbocivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dturbocivic »</TD></TR><TR><TD CLASS="quote"> sent this clown 360 i belive for a GSR bare block.... thinking.. oh it will come with main caps...... nope. the block gets here minus the 3 center caps.. it came with the 2 outer caps.. i pm him about it....the kid beats around.... lazy on getting back to me... lazy on finding new main caps... the idiot ******* sends me LS main caps for a GSR BLOCK.... YOU MORON, i wasnt born yesterday......... leaving this block useless to me....... unless you want to refund half of the money for the block... cause that is what its going to cost for an alighn hone/bore...
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech </TD></TR></TABLE>
I WANT THE RIGHT MAIN CAPS, OR REFUND ASSWIPER
this idiot hasnt contacted me since feburary/march.....
http://hondamarketplace.com/zerothread?id=1573814
goodmornin honda-tech
</TD></TR></TABLE>
Honda-Tech Member
Joined: Jul 2003
Posts: 9,673
Likes: 0
From: driving a wolf in sheeps skin in, NY
Re: B18cJDMGSR SCAMMMER (dturbocivic)
Before you sent him the money did you ask him what exactly will be coming with a BARE shortblock? Everyone has different ideas of what a bare block is.
He tried to fix the situation by sending you the main caps that he thought were for the block. Obviously he didn't know that the original mains would be needed to properly rebuild a motor, or else he would not have sold it without them. You have to understand not everyone on honda-tech knows proper engine building procedures. I really don't think that he is at fault, you should have asked the seller for pictures and a complete list of everything that is still on the bare block. He probably would have sent you the ones for the block if he had them.
I would say the best resolution would be to find some gsr mains and align bore the block. I am sure they are around especially with so many people trying to make 500whp on stock sleeves these days. Its probably a good idea to align bore the block anyway, especially if you do not know the history of the block.
He tried to fix the situation by sending you the main caps that he thought were for the block. Obviously he didn't know that the original mains would be needed to properly rebuild a motor, or else he would not have sold it without them. You have to understand not everyone on honda-tech knows proper engine building procedures. I really don't think that he is at fault, you should have asked the seller for pictures and a complete list of everything that is still on the bare block. He probably would have sent you the ones for the block if he had them.
I would say the best resolution would be to find some gsr mains and align bore the block. I am sure they are around especially with so many people trying to make 500whp on stock sleeves these days. Its probably a good idea to align bore the block anyway, especially if you do not know the history of the block.
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: B18cJDMGSR SCAMMMER (dunkd)
i asked him, he said minus girdle. thats all. and no i havent been in contact with him. he's a scammeer, i dont give a **** if you are his mother, the kid should know better than to send a block minus main caps, then have enough nerve to send me ls caps. 
Honda-Tech Member
Joined: May 2005
Posts: 1,200
Likes: 0
From: Valley Syde, RI
Re: B18cJDMGSR SCAMMMER (dturbocivic)
bump for a solution ... i had a gsr block that blew a hole in the block.. i might have the girdle and everything . i will try to find it and take pics ..lmk if your interested...u can have it for 10 shipped.. 
Honda-Tech Member
Joined: Jan 2004
Posts: 5,400
Likes: 0
From: The Manor, NY
Re: B18cJDMGSR SCAMMMER (dunkd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dunkd »</TD></TR><TR><TD CLASS="quote">
He tried to fix the situation by sending you the main caps that he thought were for the block. Obviously he didn't know that the original mains would be needed to properly rebuild a motor, or else he would not have sold it without them. You have to understand not everyone on honda-tech knows proper engine building procedures. I really don't think that he is at fault, you should have asked the seller for pictures and a complete list of everything that is still on the bare block. He probably would have sent you the ones for the block if he had them.
</TD></TR></TABLE>
So if he didn't know, but now he knows...what's the problem. A return and money back shouldn't be a problem. He should've just said he doesn't know what's missing and sold it as is with whatever is there; at least the buyer would've been aware and knowingly taken the risk. Ignorance is no excuse.
He tried to fix the situation by sending you the main caps that he thought were for the block. Obviously he didn't know that the original mains would be needed to properly rebuild a motor, or else he would not have sold it without them. You have to understand not everyone on honda-tech knows proper engine building procedures. I really don't think that he is at fault, you should have asked the seller for pictures and a complete list of everything that is still on the bare block. He probably would have sent you the ones for the block if he had them.
</TD></TR></TABLE>
So if he didn't know, but now he knows...what's the problem. A return and money back shouldn't be a problem. He should've just said he doesn't know what's missing and sold it as is with whatever is there; at least the buyer would've been aware and knowingly taken the risk. Ignorance is no excuse.
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: B18cJDMGSR SCAMMMER (Cliffjumper2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cliffjumper2 »</TD></TR><TR><TD CLASS="quote">
Ignorance is no excuse.</TD></TR></TABLE>
exactly
Ignorance is no excuse.</TD></TR></TABLE>
exactly
Thread Starter
Honda-Tech Member
Joined: Apr 2001
Posts: 16,905
Likes: 3
From: Lansdale, PA
Re: B18cJDMGSR SCAMMMER (japspecjohn)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by japspecjohn »</TD></TR><TR><TD CLASS="quote">brian aint a scammer it was probably a mistake</TD></TR></TABLE>
hey brians butt buddy, guess what, he's had more than enough time to contact me about the situation. ive tried to contact him numerous times with not a single response from him. for you and your "friend"
hey brians butt buddy, guess what, he's had more than enough time to contact me about the situation. ive tried to contact him numerous times with not a single response from him.
for you and your "friend"