Video / Red Civic TurboD16 - In the 12"
Thread Starter
Joined: Mar 2003
Posts: 266
Likes: 0
From: Brooklyn Park, MN
Video / Red Civic TurboD16 - In the 12"
TurboD16 / Red 93 Civic Vx Swap D16z6 / 15G
1.9 60ft
12.6@110mph
rebuilt engine
-tunertoys rods - Wesico Piston 8.5.1 - Zei. 02 wideband
- Compcam stage 2 - greddy-e manage - dsm injector
- greddy 15g kit - skunk2 intake manifold
- act clutch - 3Gm Bar Sensor - FrontMount Intercooler
Boosting around 15psi running 11.0 a/f with 1 Timing retard per pound
(video turbod)
http://www.we-todd-did-racing....5NTQx
1.9 60ft
12.6@110mph
rebuilt engine
-tunertoys rods - Wesico Piston 8.5.1 - Zei. 02 wideband
- Compcam stage 2 - greddy-e manage - dsm injector
- greddy 15g kit - skunk2 intake manifold
- act clutch - 3Gm Bar Sensor - FrontMount Intercooler
Boosting around 15psi running 11.0 a/f with 1 Timing retard per pound
(video turbod)
http://www.we-todd-did-racing....5NTQx
Honda-Tech Member
Joined: Nov 2005
Posts: 9,872
Likes: 0
From: 805, CA, US
Re: Video / Red Civic TurboD16 - In the 12" (VtecbOi)
nice, great sleeper(except for that oversized IC), and fart can muffler. Other thn that 
, I think I just got an idea for my next project 
, I think I just got an idea for my next project
Trending Topics
Thread Starter
Joined: Mar 2003
Posts: 266
Likes: 0
From: Brooklyn Park, MN
Re: Video / Red Civic TurboD16 - In the 12" (VtecbOi)
well actually it's not really a sleeper, i'm broke so it look like a sleeper. and as for the muffer i took it off and make a 2.5" exhaust. i don't know if i need a bigger turbo but it would be nicer... just low on money otherwide i would of when with H22
Joined: Jun 2006
Posts: 49
Likes: 0
From: Bradenton, FL, USA
Re: Video / Red Civic TurboD16 - In the 12" (VtecbOi)
Very good for being on a Greddy 15g! That turbo kit is whats holding it back, put a GT28RS or GT2871 on that thing. It will bolt up to the Greddy exh. manifold.
Thread Starter
Joined: Mar 2003
Posts: 266
Likes: 0
From: Brooklyn Park, MN
Re: Video / Red Civic TurboD16 - In the 12" (R1Motorsports.com)
what really i can put those turbo on. man i didn't now that. i was thinking about getting a whole new setup.... but i don't know i don't think the greddy exhaust manifold is a good flowing exhaust manifold... plus those turbo are too much.. maybe a T3 super 60.. that's what i'm thinking as of now..
Honda-Tech Member
Joined: Nov 2005
Posts: 9,872
Likes: 0
From: 805, CA, US
Re: Video / Red Civic TurboD16 - In the 12" (VtecbOi)
I'd go with a gt(25,28,35...whatever size you think would be best)r series turbo they will spool faster (because it's Ball Bearing) and can handle more. Little pricey though, but boost response on those is incredible, typically spools up 500-1500 RPM quicker from what I've seen in person and heard on here.
Thread Starter
Joined: Mar 2003
Posts: 266
Likes: 0
From: Brooklyn Park, MN
Re: Video / Red Civic TurboD16 - In the 12" (broketuner-egb16a)
um.. i'll think i'll just get a T3 Super 60 cause i don't want it to spool up that fast. the T3 super 60 is small alredy and cheap. i'm thinking a 57trim. i don't want it to spool up too quick like my greddy. i have no traction first and second...... plus when i'm on the highway.. break boost... bye bye na..
Honda-Tech Member
Joined: Jun 2004
Posts: 10,812
Likes: 0
From: So Cal
Re: Video / Red Civic TurboD16 - In the 12" (VtecbOi)
Fast car
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecbOi »</TD></TR><TR><TD CLASS="quote">please check out my video...</TD></TR></TABLE>
Why? Where's the tech? you should be glad this hasn't been locked yet.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VtecbOi »</TD></TR><TR><TD CLASS="quote">please check out my video...</TD></TR></TABLE>
Why? Where's the tech? you should be glad this hasn't been locked yet.