I bought a gen three drag kit for my da and im trying to install it but it came with know manual and it came with different type of intercooler than i was expecting. The intercooler is not straight through, it is straight in and comes out the top on the other side with a 90 degree elbow directing flow back towards the passenger side of the car. If someone out there has installed this type of kit on a da, please help. Pics would be good if possible.

 

With any "kit" there is a good chance that you are gonna have to do some fabrication to make stuff work the way you want it too.

 

I realize that but, this is the first time ive seen an intercooler like this with an integra. most kits come with a straight through design to bring the piping around and back in through the driver side.

 

Well, if you bought it brand new, bring it to the attention of the retailer. Tell them they sent you the wrong intercooler and see where it goes from there.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTteg &raquo;</TD></TR><TR><TD CLASS="quote">Well, if you bought it brand new, bring it to the attention of the retailer. Tell them they sent you the wrong intercooler and see where it goes from there.</TD></TR></TABLE>

correction, he didn't get the wrong intercooler or the wrong kit. The DA integra has ABSOLUTELY NO WAY of routing the piping through the drivers side unless you remove the AC/PS or make a hole in the sheetmetal(what I did), so it routes the piping back towards the passengers side. I'll show you pics if you want some, just ask me.

 

that would be real good if i could get some pics. just enough to give me a rough idea on the routing of the pipes. thanks

 

i have a drag gen 3 kit on my 00 gsr and my intercooler is straight through. sounds like you got the wrong cooler

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blownupgsrt &raquo;</TD></TR><TR><TD CLASS="quote">i have a drag gen 3 kit on my 00 gsr and my intercooler is straight through. sounds like you got the wrong cooler</TD></TR></TABLE>


wrong, dont give false information if you don't know anything.

 

redDAinteg:
I would be interested in some pics as well. I have been thinking about going with the DRAG 3 kit, but I cannot find the pics I want. Also wanting to know if there are any modifications at all to allow the kit to fit. I have read and seen that part of the webbing usually needs to be dremeled, but that's it. I don't mind that, but it looks like I would have to cut the grill out of the bumper...no worries. Any help is greatly appreciated.

Thanks.

 

BUMP for pics from redDAinteg.