i am looking to see how or what people are running with a swapped crx i have a b18a1 with aftermarket headers and a cat back exhaust for a crx i am wondering how it was connected to the headers and if your running a cat.. i just bought a catco cat 2.25 and wondering if i should even run it.. pics are helpfull

 

?

 

https://honda-tech.com/zerothread?id=1083089

 

IMO Integra exhaust would still be a little small, id try to match your 2.25" cat with 2.25" exhaust.

I ran 2.25" headerback exhaust on my b18a in my CRX and it loved it.

 

thats what i am running... its a complete exhaust headers to tip

 

2.25 should be fine for an all motor car. i wouldnt go smaller than 2 tho

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxpwr1 &raquo;</TD></TR><TR><TD CLASS="quote">https://honda-tech.com/zerothread?id=1083089</TD></TR></TABLE>


I WENT THROUGH this whole tread and its not what i am looking for ! i have been to that exhaust thread a bunch already on choosing an exhaust ....

i need b series swapped crxs and i would like to know if your running a cat and i would like pictures

i have afull stainless steel exhaust cat back for a crx. now i would liek to see how a shop or you attached it to the headers... and if you ran a cat'

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rewerbcrx &raquo;</TD></TR><TR><TD CLASS="quote">


I WENT THROUGH this whole tread and its not what i am looking for ! i have been to that exhaust thread a bunch already on choosing an exhaust ....

i need b series swapped crxs and i would like to know if your running a cat and i would like pictures

i have afull stainless steel exhaust cat back for a crx. now i would liek to see how a shop or you attached it to the headers... and if you ran a cat'</TD></TR></TABLE>

 

n e one?