Hi, i am going to swap the engine in to my EG3, but is still thinking about what engine going to put, but i don't know what is the difference between of those engine

For B16A2 and B16B, it is just the cam ??

For B16B and B18C, what is the difference ??

And what about Between B18C1 and B18C5 ??

thx

 

Have you searched at all?

B16A2/3 is the 1.6L motor that came in USDM Civic Si/Del Sol, respectively
B16B is the JDM/UKDM Civic Type R motor

B16B and B18C both have the same block casting. The blocks are the same. The heads are different, as well as the rotating assembly for the B16B(Civic Type R). It is in essence, a de-stroked B18C to make it a 1.6L.

The B18C1 is the USDM Integra GSR motor, and the B18C5 the USDM/JDM Integra Type R motor.

There is a lot more differences between these motors, but I'm not typing for hours. Start here:

https://honda-tech.com/zerosearch
http://www.allmotorhonda.com

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by black_EM1 &raquo;</TD></TR><TR><TD CLASS="quote">Have you searched at all?
</TD></TR></TABLE>

Good advice. There is tons of info on these motors out on the net and in H-T.

 

Holy Jesus, theres a freaking thread at the top of the forum for expletive's sake

https://honda-tech.com/zerothread/878010

 

How do i know if my head is b16a2 or b18c5

 

this thread is 7 years old ! lol look at the head stamp tho angel07jdm

should say PR3 if it's a b16 head and if it's a C5 head it should say p73(correct me if i'm wrong H-T) but ya just look above the #1(closest to timing belt) exhaust port.

 

^^another bump from the dead!! 2006 - 2013. this is a good one. the OP also only had one post. nice