Installed my new clutch and flywheel. Put everything back together tranny, axles, wires all that. Go to start it up and it runs. But when i put the tranny in gear i get nothing to the axles. They dont move. From what i can hear it sounds like the clutch is engaging but nothing to the axles? Any ideas would be very helpful.

 

do you have pics of what you did or the steps you took

if ur axles arent' moving...that means the clutch probably is not in engaging some where down the line

 

What do you mean about it sounding like the clutch is engaging? Describe that in more detail.

Have someone press the clutch pedal while you watch the throw-out lever. Does it move about 1/2 inch back & forth?

 

Im going to assume your talking about the clutch fork. And yes it does move around 1/2 inch or so. Im re doing my axles and seeing if that helps anything. Gotta wait a day now because my brand new axle on the driver side is broke already. Taking that back today so it will be another day or so until i get an anwser