BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM!
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM!
UPDATE 8/02/2006: THESE ARE IN STOCK NOW!! ORDER YOURS BEFORE THEY ARE GONE!!! 
OMNI has another first!!!! Be the first to own the BRAND NEW FRONT LOWER CONTROL ARMS!! This is a brand new item being offered by OMNI-Power that is scheduled to be in stock by the end of next week.
Info from OMNI:
New Front Lightweight Lower Control Arms
Unique only to the Omni-Power product line, our light weight aluminum front lower control arms (FLCA's) are forged with a special exotic high strength aluminum based alloy. Each control arm is then hard anodized to eliminate corrosion and maintain a show quality look. Omni-Power uses a solid design for added strength and U.S. made replaceable polyurethane bushings. These FLCA's are a direct replacement for the front 2 piece design and require no modifications for an easy installation. Typical weight savings adds up to about 7+ pounds depending on the vehicle model.
Applications:
<ul>[*]92-00 Honda Civic Note: Will not fit 99-00 SI[*]94-01 Acura Integra[/list]
Preorder your set by Calling the number below or by sending Paypal payment to paypal@iapdirect.com
Price: $379.99
PM me if you have any questions!!
Modified by ImportAutoPerformance.com at 9:21 AM 6/5/2006
Modified by ImportAutoPerformance.com at 11:31 AM 7/28/2006
Modified by ImportAutoPerformance.com at 2:10 PM 8/2/2006
OMNI has another first!!!! Be the first to own the BRAND NEW FRONT LOWER CONTROL ARMS!! This is a brand new item being offered by OMNI-Power that is scheduled to be in stock by the end of next week.
Info from OMNI:
New Front Lightweight Lower Control Arms
Unique only to the Omni-Power product line, our light weight aluminum front lower control arms (FLCA's) are forged with a special exotic high strength aluminum based alloy. Each control arm is then hard anodized to eliminate corrosion and maintain a show quality look. Omni-Power uses a solid design for added strength and U.S. made replaceable polyurethane bushings. These FLCA's are a direct replacement for the front 2 piece design and require no modifications for an easy installation. Typical weight savings adds up to about 7+ pounds depending on the vehicle model.
Applications:
<ul>[*]92-00 Honda Civic Note: Will not fit 99-00 SI[*]94-01 Acura Integra[/list]
Preorder your set by Calling the number below or by sending Paypal payment to paypal@iapdirect.com
Price: $379.99
PM me if you have any questions!!
Modified by ImportAutoPerformance.com at 9:21 AM 6/5/2006
Modified by ImportAutoPerformance.com at 11:31 AM 7/28/2006
Modified by ImportAutoPerformance.com at 2:10 PM 8/2/2006
EFSS153
Joined: Oct 2004
Posts: 15,826
Likes: 1
From: Tornado Alley
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
Let Omni know there is a big market for EFs. I'd love to have a set, but they dont offer them.
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAallTheWAY »</TD></TR><TR><TD CLASS="quote">Let Omni know there is a big market for EFs. I'd love to have a set, but they dont offer them.</TD></TR></TABLE>
I will definitely send them your suggestion. Thanks.
I will definitely send them your suggestion. Thanks.
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
Re: (AllaBlurDA)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AllaBlurDA »</TD></TR><TR><TD CLASS="quote">DA'S AS WELL YO! lol
I know tons of da's would buy these up</TD></TR></TABLE>
I have expressed your interests to them. Thanks for the posts.
I know tons of da's would buy these up</TD></TR></TABLE>
I have expressed your interests to them. Thanks for the posts.
Trending Topics
Honda-Tech Member
Joined: Sep 2001
Posts: 1,851
Likes: 0
From: Twin Cities
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAallTheWAY »</TD></TR><TR><TD CLASS="quote">Let Omni know there is a big market for EFs. I'd love to have a set, but they dont offer them.</TD></TR></TABLE>
I agree!!
I agree!!
Honda-Tech Member
Joined: Aug 2005
Posts: 527
Likes: 0
From: Honolulu, HI, USA
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NAallTheWAY »</TD></TR><TR><TD CLASS="quote">Let Omni know there is a big market for EFs. I'd love to have a set, but they dont offer them.</TD></TR></TABLE>
X2!!!!!
hopefully Omni has done the proper r&d on these. id hate to have my front suspension fall off when im on the freeway going 80.
X2!!!!!
hopefully Omni has done the proper r&d on these. id hate to have my front suspension fall off when im on the freeway going 80.
Honda-Tech Member
Joined: Jun 2003
Posts: 768
Likes: 1
From: irvine, ca, usa
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zclee.com »</TD></TR><TR><TD CLASS="quote">
X2!!!!!
hopefully Omni has done the proper r&d on these. </TD></TR></TABLE>
Omnipower front LCA's have been under development for over 1 year. They have been tested in both drag racing and road racing vehicles. Several design changes took place during the R&D process based on testing and analysis both by Omni-Power and SGS, (the global leader in product testing). Each step of the manufacturing process was inspected and certified as well as the special forged aluminum alloy used for construction.
Currently Omnipower is the only company that has produced an aftermarket front aluminum LCA for the honda chassis that is certified by http://www.sgs.com/about_sgs/in_brief.htm. Omnipower went to great lengths to ensure a product of the highest possible quality.
Each Omnipower front LCA comes standard with replaceable hard polyeurothane bushings that have a life time warranty. Each set will reduce weight by 7 pounds total.
The super high strength certified aluminum alloy is made in japan. bushings are made in USA. so they are half jdm and half usdm.
Copied off SGS website
"SGS is the world’s leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With 43'000 employees, SGS operates a network of about 1’000 offices and laboratories around the world."
Currently used in Loan Nyguens Street Stock NHRA record setting Civic EK.
X2!!!!!
hopefully Omni has done the proper r&d on these. </TD></TR></TABLE>
Omnipower front LCA's have been under development for over 1 year. They have been tested in both drag racing and road racing vehicles. Several design changes took place during the R&D process based on testing and analysis both by Omni-Power and SGS, (the global leader in product testing). Each step of the manufacturing process was inspected and certified as well as the special forged aluminum alloy used for construction.
Currently Omnipower is the only company that has produced an aftermarket front aluminum LCA for the honda chassis that is certified by http://www.sgs.com/about_sgs/in_brief.htm. Omnipower went to great lengths to ensure a product of the highest possible quality.
Each Omnipower front LCA comes standard with replaceable hard polyeurothane bushings that have a life time warranty. Each set will reduce weight by 7 pounds total.
The super high strength certified aluminum alloy is made in japan. bushings are made in USA. so they are half jdm and half usdm.
Copied off SGS website
"SGS is the world’s leading inspection, verification, testing and certification company. SGS is recognized as the global benchmark for quality and integrity. With 43'000 employees, SGS operates a network of about 1’000 offices and laboratories around the world."
Currently used in Loan Nyguens Street Stock NHRA record setting Civic EK.
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
Thanks for the post Steve. That should reassure anyone who had questions about the integrity of this product.
Honda-Tech Member
Joined: Apr 2003
Posts: 11,697
Likes: 0
From: Just Drank A 5th of VODKA Dare me to drive, Ca, u.s.
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
there is NEVER **** for the ef, wtf, do our cars not exist?
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
Thank you for your orders! All PM's replied. Have a great 4th of July everyone!!
Member
Joined: Aug 2002
Posts: 3,864
Likes: 1
From: Wilmington, De, USA
Re: (zclee.com)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zclee.com »</TD></TR><TR><TD CLASS="quote">, any news on EF FLCAs?</TD></TR></TABLE>
Thread Starter
Joined: Dec 2004
Posts: 16,940
Likes: 0
From: Where East Meets West, U.S.
Re: (vincepru)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vincepru »</TD></TR><TR><TD CLASS="quote">hey i need some front LCA's for a 98 integra. pm me a price shipped to 44040 please. i need these asap :D</TD></TR></TABLE>
PM sent.
PM sent.
Honda-Tech Member
Joined: Nov 2004
Posts: 1,146
Likes: 0
From: Sacramento/Antelope, CA
Re: BRAND NEW OMNI POWER FRONT LOWER CONTROL ARMS! BE THE FIRST TO HAVE THEM! (ImportAutoPerformance
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by omniman »</TD></TR><TR><TD CLASS="quote">
Currently Omnipower is the only company that has produced an aftermarket front aluminum LCA for the honda chassis that is certified by http://www.sgs.com/about_sgs/in_brief.htm. Omnipower went to great lengths to ensure a product of the highest possible quality.
</TD></TR></TABLE>
Glad to see u got everything worked out from the issue's that happened before! I would get a set but no money is an issue, lol. Bump it for good stuff.
Currently Omnipower is the only company that has produced an aftermarket front aluminum LCA for the honda chassis that is certified by http://www.sgs.com/about_sgs/in_brief.htm. Omnipower went to great lengths to ensure a product of the highest possible quality.
</TD></TR></TABLE>
Glad to see u got everything worked out from the issue's that happened before! I would get a set but no money is an issue, lol. Bump it for good stuff.