Just replaced lower control arm bushes, steering inner tie rods, lower balljoints, upper control arms and n/s cv joint on my 91 B16A1 CRX R/H Drive U.K. car.
I did the work on the n/s first, car drove fine with no rattles or clunks. The rattling on bumpy roads started after doing the drivers side. I have re- checked everything, everything is tight. I even replaced the steering rack end bush, no better, and adjusted the steering rack pre-load- no better.
I can't find play in anything. The noise feels low down, as if in the steering rack. This is a mystery. Help!

 

hmm, i dunno what to reply since your reasoning is sound to recheck your work...

try this area of honda-tech, the crx forums