Alright guys - i've got a ton of stuff for sale. I'm not listing prices for anything, it's all best reasonable offer .. if all you're going to do is lowball me, then don't bother... i know what this stuff goes for and so do you, so let's end the bullshit

YES - I am paypal verified and this is also the method of payment that is preferred.

I'm located in the Altoona, PA area (45 min from State College, 1.5 hours from Pittsburgh)

Local pickup is preferred on the bigger items, but i'll ship at the buyer's expense.

PICS AT BOTTOM OF POST!!!

Alright, here's my stuff ... buy it PLEASE!!!

Endyn Alternator Stepper Pulley for Jackson Racing Supercharger
fits DOHC supercharged applications. Puts boost to ~9psi w/ JRSC 6psi pulley, ~11 w/ JRSC 8psi pulley

Hawk HPS brake pads (front/rear)
BRAND NEW IN BOX. Fits 94+ GSR for sure and probably some others as well

Brembo Blank Rotors (front/rear)
BRAND NEW IN BOX. Fits 94+ GSR for sure and probably some others as well

Garrett T3/T04e 57 trim .63 a/r
Excellent condition. Roughly 1,500 miles on turbo. This is the standard full race stage 1, peakboost kit, etc turbo. Made 409 whp 283 ft/lbs tq at 16 psi on pump gas on a 84mm B16 ~10:1 c/r

Golden Eagle Sleeved B16 shortblock w/ polished crank
The motor had cracked a ringland in #4, definately needs a hone, possibly bore to 85, I can take it to a machine shop and see what they think if you are interested.

Eagle Rods
used, but excellent condition. B16


3" GReddy Power Extreme 2 cat back exhaust
94+ 2 door integra, used but in good condition. Muffler is a bit smaller than turbo N1.

Omni Power Front and Rear Camber Kit
BRAND NEW IN BOX, includes sticker , Civic, Del Sol, Integra

Supertech valvesprings
used for under 1000 miles. I believe 75 lb seat pressure, taken to 9300 with no problem. DOHC VTEC
PENDING SALE

Portflow retainers
used for under 1000 miles. I believe 75 lb seat pressure, taken to 9300 with no problem. DOHC VTEC
PENDING SALE

98 spec JDM ITR/ CTR Intake Cam
used

Buddy Club adjustable cam gears
Gold, Used, DOHC VTEC

Sparco Sprint Bucket Seat
Black, non adjusable, Excellent condition

Sparco Torino Reclinable Seat
Black w/ Grey, good condition

OEM JDM EK4 Yellow square foglights w/ harness and switch
Excellent condition, used for 1 week, never wired up, take off to fit intercooler piping in bumper
PENDING SALE

VIS (i think) Carbon Fiber front lip
Used, scratched on bottom, one chip on corner. 94+ JDM ITR front end

99/00 Red/Clear tail lights
coupe, excellent condition

12:1 Vortech FMU
[i]used[/o]

Missing Link
used

95 GSR head.
[i]75,000 miles. May or may not be salvagable. See pics.. No cams, no springs, no retainers .... everything else (cam caps, all bolts, etc)

Alright guys - that's all I got. PM me if you're interested in something. Like i said, i'm in PA and would rather the big stuff be picked up... I am able to drive to meet someone if it's within reason (we can talk about that in PM. Someone please buy my stuff!!! I need to get my car running!

Things I'm looking for
running GSR long block w/ obd1 ECU
running LS long block w/ obd1 ECU
running B20 Longblock w/ obd1 ECU
Stock LS/Type R/B16 airbox (once i get a longblack)
and anything else of interest.... but i need my car to run ... so bolt ons, etc i will not need




BUDDYCLUB CAMGEARS


CTR INTAKE CAM (next to gsr exhaust cam - cam gear not included)


GSR HEAD, NO MANIFOLD, CAMS, VALVE COVER, SPRINGS OR RETAINERS INCLUDED


DAMAGE TO HEAD


CLOSEUP OF DAMAGE TO HEAD


BLOCK


CLOSEUP OF ONLY BAD PART ON BLOCK - DEF. NEEDS HONE, MAYBE RE-BORE


OTHER 3 CYLINDERS IN BLOCK


GARRETT T3/T04E


DRIVER'S SIDE 99/00 TAILLIGHTS


PASSENGER'S SIDE 99/00 TAILLIGHTS


TORINO FRONT


TORINO BACK


EK4 FOGS


SPRINT FRONT


SPRINT BACK


SPRINT LABEL


STEPPER PULLEY


BREMBO ROTORS


OMNIPOWER CAMBER KIT


HAWK PADS

----------
ALRIGHT - I MIGHT HAVE MISSED A FEW THINGS, SO IF I DID, LET ME KNOW. IF YOU NEED ANY OTHER PICS, LET ME KNOW AND I'LL DO MY BEST TO TAKE THEM AND POST THEM UP.

FOR ***** AND GIGGLES, HERE ARE A FEW PICS OF MY CAR ... THE DONOR CAR











buy my crap!

Modified by miyagi at 11:48 PM 5/29/2006


Modified by miyagi at 9:45 PM 6/1/2006

 

TTT with this stuff ... it needs SOLD!

 

 

pm'd you

 

replied

 

pm sent

 

bump for pics

 

TTT

 

 

bump

 

What type of block is that? and how much/

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by miyagi &raquo;</TD></TR><TR><TD CLASS="quote">Golden Eagle Sleeved B16 shortblock w/ polished crank</TD></TR></TABLE>

 

how much for itr intake cam and the buddy club cam gears?