Testing Waters: Freshly Built GSR head with shaved vented valvecover
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 3,110
Likes: 0
From: SoCal, Ca, USA
Testing Waters: Freshly Built GSR head with shaved vented valvecover
EDIT: Decided to keep the vented valvecover, I'll do the head for $875 shipped + paypal, or $850 picked up. INCLUDES VIRGIN VALVECOVER.
I really dont wanna get rid of this head. I was really looking forward to using it, but I need a little extra cash right now. I might end up using it if theres no real interest in this.
This is a 95 GSR head built by PortFlow. Head was dissassembled, hot tanked, re surfaced, 3 angle valve job, and assembled with all new seals, SuperTech valvesprings, Ti SuperTech retainers, and black nitride coated SuperTech dished valves. Includes original cam caps/rails and water neck. 0 MILES!!! The valvecover was shaved, drilled on the exhaust side, and aluminum nipples were welded on. Then it was repainted wrinkle black. Valvecover is UNCUT and comes with sparkplug cover (fair condition), oil filler cap and breather filter. I put $800 into the bare head alone, so I'll do $1000 obo shipped paypal included. Located in San Diego.
DOES NOT INCLUDE: sensors, vtec selenoid, dizzy, manifolds, or cams.
Modified by guymosiris at 6:45 PM 5/24/2006
Modified by guymosiris at 1:31 PM 5/25/2006
Modified by guymosiris at 9:41 PM 5/25/2006
Modified by guymosiris at 5:25 PM 5/30/2006
I really dont wanna get rid of this head. I was really looking forward to using it, but I need a little extra cash right now. I might end up using it if theres no real interest in this.
This is a 95 GSR head built by PortFlow. Head was dissassembled, hot tanked, re surfaced, 3 angle valve job, and assembled with all new seals, SuperTech valvesprings, Ti SuperTech retainers, and black nitride coated SuperTech dished valves. Includes original cam caps/rails and water neck. 0 MILES!!! The valvecover was shaved, drilled on the exhaust side, and aluminum nipples were welded on. Then it was repainted wrinkle black. Valvecover is UNCUT and comes with sparkplug cover (fair condition), oil filler cap and breather filter. I put $800 into the bare head alone, so I'll do $1000 obo shipped paypal included. Located in San Diego.
DOES NOT INCLUDE: sensors, vtec selenoid, dizzy, manifolds, or cams.
Modified by guymosiris at 6:45 PM 5/24/2006
Modified by guymosiris at 1:31 PM 5/25/2006
Modified by guymosiris at 9:41 PM 5/25/2006
Modified by guymosiris at 5:25 PM 5/30/2006
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 3,110
Likes: 0
From: SoCal, Ca, USA
Re: Testing Waters: Freshly Built GSR head with shaved vented valvecover (guymosiris)
I'll include an oem black untouched valvecover and the inside timing belt cover with this head.
Thread Starter
Honda-Tech Member
Joined: Sep 2002
Posts: 3,110
Likes: 0
From: SoCal, Ca, USA
Re: Testing Waters: Freshly Built GSR head with shaved vented valvecover (buckNasty)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by buckNasty »</TD></TR><TR><TD CLASS="quote">good deal 
</TD></TR></TABLE>
Yeah, its pretty much like getting a free bare head.
</TD></TR></TABLE>Yeah, its pretty much like getting a free bare head.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
guymosiris
Southern California (Sales)
18
Sep 27, 2006 06:25 PM
guymosiris
For Sale
11
May 31, 2006 11:40 AM