Alright im doing the JDM d15b swap, with all the threads ive seen people just got the P28 Ecu and the way i wanna go is just getting my p06 burned for vtec because its alot cheaper and im poorer, so how would i wire a p06, the engine harness that came with the engine is cut, so i took everything off and have harness laying away so i can just reuse my engine harness thats currently in the car. Would i need to get some things of the harness that came with the D15b?

btw: engine: D15b7
car: 1994 Civic Hatch

**Also what would this engine be labled in a America, so i can get the correct timming belt and all**

Thanks for the help


Modified by McGeeTM at 9:33 PM 5/21/2006

 

bump

 

no one? you slackers!

 

Use the harness thats on your car. A jdm harness is only good for parts. I think all you're going to need to add is vtec. search on how to add the wires to the ECU clips.

 

yeah i need to know which is the better way to go. P06 ecu chipped, or a P28.
I cant find any P08 ecu's that are less then $150, also wanted to know if i would throw codes with a P28

 

bump