Adjusting valves on an ITR
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 946
Likes: 0
From: San Jose, CA
Adjusting valves on an ITR
i have the specs for the GSR, but i was wondering what size feeler gauge do i use for lashing the valves on an ITR?
thanxs in advance for the tech help!
thanxs in advance for the tech help!
Honda-Tech Member
Joined: Oct 2000
Posts: 6,236
Likes: 0
From: Texasss
Re: Adjusting valves on an ITR (KraZyCHOWMEIN)
Straight fromthe helms:
Sorry this if for a B18B1
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
[Modified by AssPenny, 7:57 PM 4/12/2002]
Sorry this if for a B18B1
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
[Modified by AssPenny, 7:57 PM 4/12/2002]
Honda-Tech Member
Joined: Jan 2000
Posts: 2,150
Likes: 7
From: FL, USA
Re: Adjusting valves on an ITR (AssPenny)
Straight fromthe helms:
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
B18C1 and B18C5 are
INTAKE: .15-.19mm (.006-.007 in.)
EXHAUST: .17-.21mm (.007-.008 in.)
Page 6-43 in helm.
EDIT: Mistyped exhaust mm spec.
[Modified by Aleph, 7:49 PM 4/12/2002]
Honda-Tech Member
Joined: Jan 2000
Posts: 1,074
Likes: 1
From: Bellingham, WA, USA
Re: Adjusting valves on an ITR (AssPenny)
Trending Topics
Thread Starter
Honda-Tech Member
Joined: Mar 2001
Posts: 946
Likes: 0
From: San Jose, CA
Re: Adjusting valves on an ITR (KraZyCHOWMEIN)
thanxs for the help guys, i knew the specs for the GSR i was just wondering if there was a different setup for the ITR
and nice website very good descriptions and directions
and nice website very good descriptions and directions
Honda-Tech Member
Joined: Apr 2001
Posts: 4,266
Likes: 0
From: Santas Neighbor, Canada
Re: Adjusting valves on an ITR (Aleph)
Phew...for a second I thought I did it wrong.
-Tommy who really needs to get a helms manual of his own instead of relying on c-speed's website
-Tommy who really needs to get a helms manual of his own instead of relying on c-speed's website
Straight fromthe helms:
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
That's for the B18B
Intake: 0.08 - 0.12 mm (0.003 - 0.005 in)
Exhaust: 0.16 - 0.20 mm (0.006 - 0.008 in)
That's for the B18B
Thread
Thread Starter
Forum
Replies
Last Post
