B18 ls-vtec motor and head many mods...very nice check it out
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 283
Likes: 0
From: mount sinai, ny, united states
B18 ls-vtec motor and head many mods...very nice check it out PRICE DROPPED AGAIN 1500
-B18A LS Block
-Block Cylinders has been rehoned 81mm
-1995 B18b LS Crank
-B18B Crank has been Micropolished
-Crank has enlarged oil journals for better flow
-Crank has been balanced
-P4 Rods Shotpeened for extra strength
-Brand New P30 B16 second Generation Pistons
-Rods have been machined and Wrist pins pressed into Pistons
-New Piston Rings
-New Main Bearings
-New Rod Bearings
-New Head Gaskets
-ARP Head Studs
-B18c GSR Head
-High Lift Skunk 2 Stage 2 Spec Camshafts for Major Top end Horsepower
-Head is Freshly Ported and Hot Tanked
-Intake and Exhaust ports ported
-Intake and Exhaust ported polished
-Head Resurfaced and Milled
-Combustion Chamber Polished and Deburred
-Bowl Blended
-3 Angle Valve Job
-Dual Inner Valve springs
-Type R Outer Valve springs
-Also comes with AEM V2 intake for 200 extra
Has 0 miles on rebuild, was gonna be for my swap but need money for other stuff.
I bought this for 3200 shipped. i will let it go for 1800...pickup only. if u need it shipped u must take care of shipping yourself...all offers are welcome and this will stay listed until i recieve full payment from the buyer. Thanksfor your time everyone and bump for me if u like the setup. Thanks
Modified by projektvtec at 9:51 AM 5/25/2006
Modified by projektvtec at 7:43 AM 6/18/2006
-Block Cylinders has been rehoned 81mm
-1995 B18b LS Crank
-B18B Crank has been Micropolished
-Crank has enlarged oil journals for better flow
-Crank has been balanced
-P4 Rods Shotpeened for extra strength
-Brand New P30 B16 second Generation Pistons
-Rods have been machined and Wrist pins pressed into Pistons
-New Piston Rings
-New Main Bearings
-New Rod Bearings
-New Head Gaskets
-ARP Head Studs
-B18c GSR Head
-High Lift Skunk 2 Stage 2 Spec Camshafts for Major Top end Horsepower
-Head is Freshly Ported and Hot Tanked
-Intake and Exhaust ports ported
-Intake and Exhaust ported polished
-Head Resurfaced and Milled
-Combustion Chamber Polished and Deburred
-Bowl Blended
-3 Angle Valve Job
-Dual Inner Valve springs
-Type R Outer Valve springs
-Also comes with AEM V2 intake for 200 extra
Has 0 miles on rebuild, was gonna be for my swap but need money for other stuff.
I bought this for 3200 shipped. i will let it go for 1800...pickup only. if u need it shipped u must take care of shipping yourself...all offers are welcome and this will stay listed until i recieve full payment from the buyer. Thanksfor your time everyone and bump for me if u like the setup. Thanks
Modified by projektvtec at 9:51 AM 5/25/2006
Modified by projektvtec at 7:43 AM 6/18/2006
Trending Topics
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 283
Likes: 0
From: mount sinai, ny, united states
Re: B18 ls-vtec motor and head many mods...very nice check it out PRICE DROPPED (projektvtec)
1500 if anyone can pick it up tmrw.....super low price....need to sell
Thread Starter
Junior Member
Joined: Jul 2005
Posts: 283
Likes: 0
From: mount sinai, ny, united states
Re: B18 ls-vtec motor and head many mods...very nice check it out PRICE DROPPED AGAIN 1500 (projektv
yes it will fit no problem.....if u have a bseries in ur car now...u will have everything.....u will just need a ecu with vtec on it...gsr would work...but chipped ecu would help it perform 100 times better