I had 6 bent Valves and brought it to a guy to fix it. He did my valve springs and everything and adjust it. he charge me 800 for it, i thought it was a good deal considering at auto shop it would cost me 1200-1400.. when i start the car, the engine shakes and the rpm is really really close to 0 and when i see that happening I step on the gas so it revs higher so it wouldnt stall on me..sometimes when I am braking at a red light I put my car into netruel it would stall on me..its really starting to bother me alot because i would stop at a red light and before i even come to a complete stop it would stall on me and i would have to start it up in front of everyone, Which is really embrassing.Sometimes it would stall on me when i am under 20 and turning so i would have to start it back up while i am about 15 mph..What would be my problem. could the timing be off somehow? I also have another problem with my Vtec..When I step on the gas my Vtec Kicks in at 6k and when it kicks in, I hear it but i cant feel the pull..O yea my 02 sensor came out and the engine light was on but when we plug it back in and un plugged the battery so the ecu can reset and the engine light was gone but before the 02 came out my vtec kicked in at 5500 and i could feel the pull.. I know when Vtec kicks in, you would feel it and hear it but in my case u can hear it at 6k but dont feel the pull..is there something wrong with my Vtec, i 02 sensor came loose when exhaust pro weld my piping..(damn THEM) ..well any info would help..tks in advance

P.S I have a DC Sports 4-1 Headers and a Dc Sports Short Ram Intake and new spark plugs and accel ignition wires..


Modified by GsRTegKid at 6:37 AM 5/15/2006