if anyone might know some crvtec specs let me know. im curious. i want to know what to expect? i heard it will push close to 210 whp and like 200 lbs of torque. dont know bout that. im also curious about a 1/4 mile time. let me know if you got info? thanks!

 

more like 170 horse and like 135 or 140 lb feet torque. It can be built up more. Just like any motor.
(my numbers might be off a tad). Do a search for crvtec

 

i seen this guy run 14 flat in a b20vtec hatch its pretty nice set up to have

 

I got a B20 vtec swap bone stock with a B16 head your pushing about 175 whp and 140 ft pounds tourqe, I built my engine up and without boost I had 234 low comp, now that I'm boosted I have a peak of 464 on stock sleeves Wich is pushing it but you can safely run 10 pounds of boost I see it all the time running 10's 1/4 mile. Just if your gunna run a B16 tranny your gunna need LSD and some radials to run down the track or you won't even move

 

There is no way of telling. Horsepower only depends on

The dyno
The temp
The altitude
The parts
The health of the engine
The tuner
etc

There is no way of predicting the power.

 

Just bought a b20v Honda hatch, 1994 and it seems kinda slow. Had a dodge ram 1500 5.7 hemi that felt like it could pull harder, wish i would have raced them both. But anyway the guy who sold me the car, sold it to me for 2800. Car was freshly painted and looked good, Leather seats, anyway he told me the head has valvetrain for high rpm and the b20 is the high compression, the piston he said are a little better and supposedly it has adjustable cams. Now how much horsepower and torque do you think i have on it? Also what could i do in terms of add on's that would help me take out a ford mustang GT? My boss drives one, so i want to wipe the floor with him. Any help would be great, thanks!