I wonder if anyone is using this Eibach front camber kit on your 99-00 EM1 for auto-x or HPDE/road race etc? I know quite some ppl are using skunk2/Ingalls(?)'s product. As I re-call some members reported slipping problem on those kits and u can't adjust caster on the skunk2 setup right?

http://www.drivewire.com/perfo....html

From the price listed in the above website, it just cost around the same as the skunk2's but I can adj caster with the Eibach kit.

My EM1 is running a set of Zeal B6 coilovers and I do have a set of SPC rear camber kit installed for auto-x & some HPDE right now. The car is lowered to where I can barely fit 1 finger in up front & 1 1/2 finger at the back(yea I know it sound very ricer like but I've forgot the exact measurement after I did the height adj last month).

I got -1.3degree camber up front now and the rear is adjusted to -1.0degree(alignment done with 205/50 032R on it if that matters). I don't really wanna go much lower up front but I want to get more negative camber. -1.8 to -2degrees' camber up front would be nice.

How can I achieve that?

Anyone of u got this front camber kit setup on your EG/EK/DC/DB for auto-x/HPDE use? Pls share your experience, TKS!

 

Anyone?