I have a MoTec M400 that I have been running RC 1000cc injectors. The peak current was set at 2.5 on the main setup. I was wondering what you need to set that at for the 1600cc injectors. I keep setting off 1-4 injector peak codes. I called precision and they didn't know. Hopefully someone on here has ran this setup and can help me out.

Any info is greatly appreciated

 

What's the resistance on the injector?

 

4.7 ohms

 

Try 1.5 amps...

 

Tony, always the helpful 1.

 

sure is...

 

i'm running 1.5 amps on those injectors too.

on the battery comp mine is set to 12.

 

cool, thanks for the info guys, the peak codes are gone!!!

I went ahead and set the battery comp to 12. It was at 2 for the RC injectors??

 

"F1" is your friend

 

I know, but I just dont want to screw anything up.

 

when do u see the peak code? engine cranking? or when the engine is fired and running?

 

as soon as I give it any gas. it will sit there and idle just fine but when I give it any throttle the codes will trip. they are gone now though

 

Ah the good old F1 "help"/info button.